Schneider Electric SSL1A12JDPV Ssr,2A@24-280Vac Zero,3-12Vdc, Screw Pack of 30

(No reviews yet) Write a Review
SKU:
SSL1A12JDPV
UPC:
3606489562953
Condition:
New
Maximum Switching Voltage:
1 V DC turn-off
Rohs Exemption Information:
Yes
Solid State Output Type:
zero voltage switching || SCR output
Height:
96.5 mm
Dielectric Strength:
2500 V for input/output
Input Impedance:
333 kOhm
Ambient Air Temperature For Storage:
-20-85 °C
Phase:
1 phase
Maximum I²T For Fusing:
285 A².s for 10 ms at 50 Hz || 260 A².s for 8.3 ms at 60 Hz
Line Rated Current:
0.0833333333333333
Output Switching Mode:
zero voltage switching
Maximum Leakage Current:
4 mA off-state
Marking:
cURus || CSA || CE || EAC
Product Certifications:
UL || CSA || CE || UL 508 || CSA22.2 No. 14-10 || GOST
Flame Retardance:
V0 conforming to UL 94
China Rohs Regulation:
X
Circularity Profile:
ENVEOLI1405004EN
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Width:
6.2 mm
Mounting Support:
screw socket
Ip Degree Of Protection:
IP20
Response Time:
0.5 cycle (turn-on) || 0.5 cycle (turn-off)
Depth:
79.5 mm
Connections - Terminals:
flexible cable with cable end, 0.2...2.5 mm² AWG 24...AWG 14) || solid cable with cable end, 0.2...2.5 mm² AWG 24...AWG 14)
Net Weight:
0.0285 kg
Dv/Dt:
500 V/µs off-state at maximum voltage
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Device Short Name:
SSL
Range Of Product:
Harmony Solid State Relays
Maximum Voltage Drop:
<1.1 V on-state
Pollution Degree:
2
Ambient Air Temperature For Operation:
-20-70 °C
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Environmental Disclosure:
ENVPEP1405004EN
Mercury Free:
Yes
Surge Current:
120 A 16.6 ms || 115 A 20 ms
Absolute Maximum Voltage:
600 V AC
Load Current:
0.07-2 A
Product Or Component Type:
solid state relay up to 10 A
Tightening Torque:
< 0.5 N.m || 4.4 lb-in
Reach Free Of Svhc:
Yes
Overvoltage Category:
III
Warranty:
18 Months
Minimum Switching Voltage:
4 V DC turn-on
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Sustainable Offer Status:
Green Premium product
Standards:
IEC 60950-1 || IEC 61000 || IEC 62314 || IEC 61984 || EN 61984
Capacitance Unbalance:
1.5 pF input/output
  • Schneider Electric SSL1A12JDPV Ssr,2A@24-280Vac Zero,3-12Vdc, Screw Pack of 30
  • Schneider Electric SSL1A12JDPV Ssr,2A@24-280Vac Zero,3-12Vdc, Screw Pack of 30
  • Schneider Electric SSL1A12JDPV Ssr,2A@24-280Vac Zero,3-12Vdc, Screw Pack of 30
$1,297.80

Description

This slim interface solid state relay belongs to the Schneider Electric Harmony solid state relays range. This is a pre-assembled relay mounted on a socket that has a built-in reverse polarity protection circuit and a LED indicator. This is a 2A zero voltage switching slim relay with 4Vdc to 12Vdc input and 24Vac to 250 Vac output. This pre-assembled relay is a ready-to-go package saving assembly time. This 6mm relay has an IP67 water resistant encapsulation and a IP20 socket protection. The relay socket connection is by screw connector type with a lever for locking or releasing the relay. This SSL weighs 0.033Kg. It is the ideal solution for packaging, HVAC, injection molding, textile machines, medical equipment, and heating control applications. It conforms to international standard and certifications like IEC, UL, CSA, CE, ROHS, GOST, EN, and REACH. It is sold in lots of 30. Thiss is a complete range of control input and load output configurations for both AC and DC switching applications. The pre-assembled range in SSL brings you easier selection, time-saving in installation and robustness.
View AllClose