Schneider Electric SSL1D03JDPR Ssr,3.5A@1-24Vdc,3-12Vdc,Spring Pack of 30

(No reviews yet) Write a Review
SKU:
SSL1D03JDPR
UPC:
3606489563011
Condition:
New
Ambient Air Temperature For Storage:
-20-85 °C
Maximum Voltage Drop:
<0.5 V on-state
Response Time:
0.12 ms (turn-off) || 0.1 ms (turn-on)
Connections - Terminals:
flexible cable with cable end, 0.2...1.5 mm² AWG 24...AWG 16) || solid cable with cable end, 0.2...1.5 mm² AWG 24...AWG 16)
Maximum Switching Voltage:
1 V DC turn-off
Absolute Maximum Voltage:
30 V DC
Ambient Air Temperature For Operation:
-20-70 °C
Phase:
1 phase
Range Of Product:
Harmony Solid State Relays
Surge Current:
9 A 10 ms
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Warranty:
18 Months
Solid State Output Type:
Mosfet output || DC switching
Environmental Disclosure:
ENVPEP1405004EN
Device Short Name:
SSL
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
China Rohs Regulation:
X
Output Switching Mode:
DC switching
Maximum Leakage Current:
0.001 mA off-state
Minimum Switching Voltage:
4 V DC turn-on
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Output Voltage:
1...24 V DC
Mounting Support:
spring socket
Mercury Free:
Yes
Reach Free Of Svhc:
Yes
Dielectric Strength:
2500 V for input/output
Rohs Exemption Information:
Yes
Net Weight:
0.0285 kg
Overvoltage Category:
III
Height:
104.6 mm
Width:
6.2 mm
Product Certifications:
UL || CSA || CE || UL 508 || CSA22.2 No. 14-10 || GOST
Input Impedance:
500 Ohm
Sustainable Offer Status:
Green Premium product
Circularity Profile:
ENVEOLI1405004EN
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Load Current:
0.001-3.5 A
Product Or Component Type:
solid state relay up to 10 A
Ip Degree Of Protection:
IP20
Capacitance Unbalance:
1.5 pF input/output
Line Rated Current:
3.5 A
Pollution Degree:
2
Tightening Torque:
10...40 N.m
Depth:
79.5 mm
Marking:
cURus || CSA || CE || EAC
Flame Retardance:
V0 conforming to UL 94
Standards:
IEC 60950-1 || IEC 61000 || IEC 62314 || IEC 61984 || EN 61984
  • Schneider Electric SSL1D03JDPR Ssr,3.5A@1-24Vdc,3-12Vdc,Spring Pack of 30
  • Schneider Electric SSL1D03JDPR Ssr,3.5A@1-24Vdc,3-12Vdc,Spring Pack of 30
  • Schneider Electric SSL1D03JDPR Ssr,3.5A@1-24Vdc,3-12Vdc,Spring Pack of 30
$1,797.60

Description

This slim interface solid state relay belongs to the Schneider Electric Harmony solid state relays range. This is a pre-assembled relay mounted on a socket that has a built-in reverse polarity protection circuit and a LED indicator. This is a 3.5A DC switching slim relay with 4Vdc to 12Vdc input and 1Vdc to 24Vdc output. This pre-assembled relay is a ready-to-go package saving assembly time. This 6mm relay has an IP67 water resistant encapsulation and a IP20 socket protection. The relay socket connection is by spring terminal type with a lever for locking or releasing the relay. This SSL weighs 0.033Kg. It is the ideal solution for packaging, HVAC, injection molding, textile machines, medical equipment, and heating control applications. It conforms to international standard and certifications like IEC, UL, CSA, CE, ROHS, GOST, EN, and REACH. It is sold in lots of 30. Thiss is a complete range of control input and load output configurations for both AC and DC switching applications. The pre-assembled range in SSL brings you easier selection, time-saving in installation and robustness.
View AllClose