Schneider Electric STBAVI0300K Analog V In 4Ch Kit Conns,Base
SKU:
STBAVI0300K
UPC:
3.59586E+12
MPN:
Condition:
New
Maximum Supply Current For Sensors:
100 mA per input channels
Analogue Input Number:
4
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Product Or Component Type:
standard analog input kit
Insulation Between Channels And Sensor Bus:
30 V
Cold Swapping:
yes
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Data Format:
EN 61131-2 || IEC 61131-2
Kit Composition:
STBAVI0300 module || STBXTS1100, 6-terminal screw type connector || STBXTS2100, 6-terminal spring clamp connector || STBXBA1000 base
Current Consumption:
90 mA 5 V DC logic bus
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Warranty:
18 months
Analogue Input Type:
voltage +/- 10 V || voltage +/- 5 V || voltage 0...10 V || voltage 0...5 V || voltage 1...5 V
Relative Humidity:
95-95 % 60-60 °C without condensation
Product Certifications:
FM Class 1 Division 2 || UL || CSA || ATEX Cat 3G || C-tick
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Vibration Resistance:
+/-0.35 mm 10-58 Hz || 3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail
Rohs Exemption Information:
Yes
Ambient Air Temperature For Operation:
13...158 °F without derating
Ambient Air Temperature For Storage:
-40-85 °C without derating
Mercury Free:
Yes
Hot Swapping Fallback:
yes for standard NIMs
Insulation Between Channels And Logic Bus:
1500 V for 1 minute
Differential Linearity:
monotonic
Shock Resistance:
30 gn 11 ms IEC 88 reference 2-27
Type Of Filter:
single low pass input filter 25 Hz
Absolute Accuracy Error:
+/- 0.75 % of full scale 25 °C
Operating Altitude:
<= 6561.68 ft (2000 m)
Analogue Input Resolution:
15 bits + sign
Marking:
CE
Ambient Air Temperature For Storage:
-40...185 °F without derating
Ambient Air Temperature For Operation:
-25-70 °C
Input Impedance:
400 kOhm
Range Of Product:
Modicon STB distributed I/O solution
Fallback Status:
state 0 basic NIMs || user configurable standard NIMs
Pollution Degree:
2 IEC 60664-1
Status Led:
1 LED (Green) module status (RDY) || 1 LED (Red) module error (ERR)
Product Compatibility:
mounting base STBXBA1000 || power distribution module STBPDT3100/3105
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard analogue input kit is an accessory kit of Programmable Logic Controllers (PLC) and Programmable...
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard analogue output kit has 2 analogue outputs with 15bit + sign resolution. It is an analogue output kit...
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard analogue input kit is an accessory kit of Programmable Logic Controllers (PLC) and Programmable...
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard analogue input kit is an accessory kit of Programmable Logic Controllers (PLC) and Programmable...
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard analogue output kit has 2 analogue outputs with 11bit + sign and 12bit output resolution. It is an...
