Schneider Electric STBDDI3425K 24Vdc In 4Pt Basic Kit Conns,Base
SKU:
STBDDI3425K
UPC:
3595863949018
MPN:
Condition:
New
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Marking:
CE
Overvoltage Category:
II
China Rohs Regulation:
X
Standards:
IEC 61131-2 Type 1
Ambient Air Temperature For Operation:
32...140 °F without derating
Ambient Air Temperature For Operation:
0-60 °C without derating)
Status Led:
1 LED (Green) module status (RDY) || 1 LED per channel (Green) channel status (IN1 to IN4)
Vibration Resistance:
3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail || +/-0.35 mm 10-58 Hz
Permissible Voltage:
30 V
Hot Swapping Fallback:
yes for basic NIMs
Input Filtering:
3 ms
Discrete Input Voltage Type:
DC
Product Compatibility:
I/O base STBXBA1000 || power distribution module STBPDT3100/3105
Rohs Exemption Information:
Yes
Absolute Maximum Voltage:
56 V 1.3 ms
Cold Swapping:
yes
Current State 1 Guaranteed:
>= 2.5 mA
Mercury Free:
Yes
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Operating Altitude:
<= 6561.68 ft (2000 m)
Range Of Product:
Modicon STB distributed I/O solution
Shock Resistance:
30 gn 11 ms IEC 88 reference 2-27
[Us] Rated Supply Voltage:
24 V DC
Product Certifications:
UL || FM Class 1 Division 2 || CSA
Relative Humidity:
95-95 % 60-60 °C without condensation
Discrete Input Number:
4
Current Supplied By Sensor:
50 mA per channel
Ambient Air Temperature For Storage:
-40-85 °C without derating
Supply:
power distribution module
Pollution Degree:
2 IEC 60664-1
Height:
18.4 mm
Response Time:
3.5 ms off-to-on || 3.8 ms on-to-off
Warranty:
18 months
Current Consumption:
45 mA 5 V DC logic bus
Product Or Component Type:
basic digital input kit
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Discrete Input Current:
8 mA
Discrete Input Logic:
positive
Current State 0 Guaranteed:
<= 1.2 mA
Ip Degree Of Protection:
IP20 conforming to IEC 61131-2 class 1
Input Voltage Limits:
11...30 V at state 1 || -3...5 V at state 0
Net Weight:
0.111 kg
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Depth:
65.1 mm
Protection Type:
power protection integrated fuse on PDM time lag 5 A || input protection resistor-limited || reverse polarity protection
Kit Composition:
STBXBA1000 base || STBDDI3425 module || STBXTS2100, 6-terminal spring clamp connector || STBXTS1100, 6-terminal screw type connector
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard discrete input kit has 6 discrete inputs with positive or negative logic. It is a discrete input kit...
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard discrete output kit has 6 discrete outputs with solid state relay. It is a discrete output kit with a...
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard power distribution kit supports hot swapping illegal fallback. This product is compatible with most...
This product is part of the Modicon STB range, an offer of modular distributed I/O. This basic discrete input kit has 16 discrete inputs with positive logic. It is a discrete input kit with a rated...