Schneider Electric STBDRA3290K Relay Out 2Pt 7A 24V Kit Conns,Base
SKU:
STBDRA3290K
UPC:
3.59586E+12
MPN:
Condition:
New
Output Voltage:
20...250 V AC || 5...30 V DC
Pollution Degree:
2 IEC 60664-1
Reset:
manual reset COM fault
Insulation Between Channels And Logic Bus:
1780 V for 1 minute
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Vibration Resistance:
3 gn 58-150 Hz 35 x 7.5 mm symmetrical DIN rail || 5 gn 58-150 Hz 35 x 15 mm symmetrical DIN rail || +/-0.35 mm 10-58 Hz
Discrete Output Type:
relay
Ambient Air Temperature For Operation:
32...140 °F without derating
Surge Current:
20 A 10 ms capacitive
Electrical Durability:
100000 cycles resistive
Rohs Exemption Information:
Yes
Standards:
IEC 61131-2
Insulation Between Channels:
500 V for 1 minute
Hot Swapping Fallback:
yes for standard NIMs
Status Led:
1 LED (Green) module status (RDY) || 1 LED per channel (Green) channel status (OUT1 to OUT2) || 1 LED (Red) module error (ERR)
Protection Type:
coil protection integrated fuse on PDM time lag 10 A || output surge protection GMOV
Discrete Output Voltage:
24 V || 115...230 V
Supply:
power distribution module
Switching Capacity In Va:
2100 VA resistive
Operating Altitude:
<= 6561.68 ft (2000 m)
[Us] Rated Supply Voltage:
24 V DC
Discrete Output Current:
7000 mA
Warranty:
18 months
Discrete Output Logic:
positive or negative
Overvoltage Category:
II
Discrete Output Function:
1 NO + 1 NC
Ambient Air Temperature For Storage:
-40...185 °F without derating
Ambient Air Temperature For Operation:
0-60 °C without derating)
Insulation Between Logic Bus And Actuator Bus:
1500 V for 1 minute
Fallback Status:
state 0 basic NIMs || user configurable standard NIMs
Product Certifications:
FM Class 1 Division 2 || UL || CSA
Range Of Product:
Modicon STB distributed I/O solution
Discrete Output Number:
2
Shock Resistance:
30 gn 11 ms IEC 88 reference 2-27
Relative Humidity:
95-95 % 60-60 °C without condensation
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Product Compatibility:
I/O base STBXBA3000 || power distribution module STBPDT3100/3105
China Rohs Regulation:
X
Discrete Output Voltage Type:
AC || DC
Net Weight:
0.13 kg
Mercury Free:
Yes
Kit Composition:
STBXTS1100, 5-terminal screw type connector || STBXBA2000 base || STBXTS2110, 5-terminal spring clamp connector || STBDRA3290 module
Current Consumption:
55 mA 5 V DC logic bus
Mechanical Durability:
1000000 cycles
Minimum Load:
50 mA
Ambient Air Temperature For Storage:
-40-85 °C without derating
Ip Degree Of Protection:
IP20 conforming to IEC 61131-2 class 1
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Height:
28.1 mm
Response Time:
10 ms off-to-on || 10 ms on-to-off
Width:
128.3 mm
Depth:
70 mm
Marking:
CE
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
This product is part of the Modicon STB range, an offer of modular distributed I/O. This standard discrete output kit has 2 discrete outputs, 2 normally open/normally contacts with solid state relay...
