Schneider Electric TM221C24U Controller M221-24Io Tr.Npn
Schneider Electric
$560.63
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric TM221C24U Controller M221-24Io Tr.Npn
CONTROLLER M221-24IO TR.NPN This product is part of the Modicon M221 range, an offer of programmable logic controllers for hardwired architectures. This logic controller provides 14 discrete, 4 fast inputs, 10 sink transistor outputs, 2 fast outputs with PNP transistor output with 10bit resolution. The I/O are connected on removable screw terminal blocks. It is a Modicon logic controller with a rated supply/output voltage of 24V DC, an output current of 0.5A with sink or source input logic and positive output logic. This product requires minimal installation and offers tremendous versatility. Integrated connections are USB port with mini B USB 2.0 connector, non isolated serial link serial 1 with RJ45 connector and RS485 interface and non isolated serial link serial 2 with RJ45 connector and RS232/RS485 interface. It is a Modicon M221 controller with 256kB for user application and data RAM, internal variables RAM, 256kB built-in flash memory and a SD card memory capacity of 2GB. It is an IP20 rated product. Its dimensions are 110mm (Width) x 70mm (Depth) x 90mm (Height). It weighs 0.395kg. This product is certified by CE, IACS E10, CSA, RCM, LR, ABS, DNV-GL, EAC and CULus. It meets EN/IEC 61010-2-201, EN/IEC 61131-2 and EN/IEC 60664-1 standards. The Modicon M221 logic controllers are programmed with EcoStruxure Machine Expert - Basic software. It supports DIN rail mount.
- Ambient Air Temperature For Operation:
- -10-55 °C horizontal installation) || -10-35 °C vertical installation)
- Local Signalling:
- for PWR 1 LED (green) || for RUN 1 LED (green) || for module error (ERR) 1 LED (red) || for SD card access (SD) 1 LED (green) || for BAT 1 LED (red) || for SL1 1 LED (green) || for SL2 1 LED (green) || for I/O state 1 LED per channel (green)
- Voltage State 0 Guaranteed:
- <= 5 V input
- Discrete Input Number:
- 14 , discrete input 4 fast input IEC 61131-2 Type 1
- Eu Rohs Directive:
- Pro-active compliance (Product out of EU RoHS legal scope)
- Input Impedance:
- 3.4 kOhm discrete input || 100 kOhm analog input || 4.9 kOhm fast input
- Ambient Air Temperature For Storage:
- -25-70 °C
- Regulation Loop:
- adjustable PID regulator up to 14 simultaneous loops
- Discrete Input Logic:
- sink or source (positive/negative)
- Discrete I/O Number:
- 24
- Maximum Voltage Drop:
- <1 V
- Product Certifications:
- EAC || DNV-GL || LR || ABS || RCM || cULus || CE || UKCA || cULus HazLoc
- Maximum Size Of Object Areas:
- 512 %M memory bits || 8000 %MW memory words || 512 %KW constant words || 255 %TM timers || 255 %C counters
- Discrete Output Logic:
- negative logic (sink)
- Discrete Output Voltage:
- 24 V DC
- Environmental Disclosure:
- ENVPEP1403012EN
- Supply Voltage Limits:
- 20.4-28.8 V
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Positioning Functions:
- PTO 2 pulse/direction 100 kHz) || PTO 1 CW/CCW 100 kHz)
- Rohs Exemption Information:
- Yes
- Standards:
- IEC 61131-2 || UL 508 || CAN/CSA C22.2 No. 213 || IACS E10 || ANSI/ISA 12-12-01
- Output Frequency:
- 100 kHz fast output (PWM/PLS mode) Q0...Q1 || 5 kHz output Q2...Q3 || 0.1 kHz output Q4...Q9
- Maximum Current Per Output Common:
- 0.208333333333333
- Pollution Degree:
- <= 2
- Discrete Output Type:
- transistor
- Mounting Support:
- top hat type TH35-15 rail IEC 60715 || top hat type TH35-7.5 rail IEC 60715 || plate or panel with fixing kit
- Backup Time:
- 1 year 25 °C by interruption of power supply)
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Environmental Characteristic:
- ordinary and hazardous location
- [Us] Rated Supply Voltage:
- 24 V DC
- Maximum Tungsten Load:
- <12 W output and fast output
- Resistance To Fast Transients:
- 2 kV IEC 61000-4-4 power lines) || 2 kV IEC 61000-4-4 relay output) || 1 kV IEC 61000-4-4 I/O) || 1 kV IEC 61000-4-4 Ethernet line) || 1 kV IEC 61000-4-4 serial link)
- Communication Port Protocol:
- USB port USB - SoMachine-Network || non isolated serial link Modbus master/slave - RTU/ASCII or SoMachine-Network
- Relative Humidity:
- 10-95 %, without condensation in operation) || 10-95 %, without condensation in storage)
- Ip Degree Of Protection:
- IP20 with protective cover in place
- Counting Input Number:
- 4 fast input (HSC mode) 100 kHz 32 bits
- Vibration Resistance:
- 3.5 mm 5-8.4 Hz symmetrical rail || 3.5 mm 5-8.4 Hz panel mounting || 1 gn 8.4-150 Hz symmetrical rail || 1 gn 8.4-150 Hz panel mounting
- Insulation:
- between input and internal logic 500 V AC || between fast input and internal logic 500 V AC || non-insulated between inputs || between output and internal logic 500 V AC || non-insulated between analogue input and internal logic || non-insulated betw
- Electromagnetic Emission:
- conducted emissions 79 dBμV/m QP/66 dBμV/m AV power lines (AC))0.15-0.5 MHz IEC 55011 || conducted emissions 73 dBμV/m QP/60 dBμV/m AV power lines (AC))0.5-300 MHz IEC 55011 || conducted emissions 120...69 dBµV/m QP power lines)10-150 kHz IEC 55
- Discrete Input Voltage:
- 24 V
- Marking:
- CE
- Surge Withstand:
- 2 kV power lines (AC) common mode IEC 61000-4-5 || 2 kV relay output common mode IEC 61000-4-5 || 1 kV I/O common mode IEC 61000-4-5 || 1 kV shielded cable common mode IEC 61000-4-5 || 0.5 kV power lines (DC) differential mode IEC 61000-4-5 || 1 kV p
- Maximum Leakage Current:
- 0.1 mA transistor output
- Supply:
- serial)serial link supply 5 V, <200 mA
- Memory Capacity:
- 256 kB user application and data RAM 10000 instructions || 256 kB internal variables RAM
- Permitted Overload On Inputs:
- +/- 30 V DC 5 min maximum)analog input || +/- 13 V DC permanent)analog input
- Response Time:
- 35 µs turn-off, I2...I5 input || 5 µs turn-on, I0, I1, I6, I7 fast input || 35 µs turn-on, other terminals input || 5 µs turn-off, I0, I1, I6, I7 fast input || 100 µs turn-off, other terminals input || 5 µs turn-on, turn-off, Q0...Q1 output ||
- Maximum Number Of I/O Expansion Module:
- 7 (local I/O-Architecture) || 14 (remote I/O-Architecture)
- Power Supply Output Current:
- 0.52-0.52 A 5 V expansion bus || 0.2-0.2 A 24 V expansion bus
- Resistance To Electromagnetic Fields:
- 10 V/m 80 MHz...1 GHz IEC 61000-4-3 || 3 V/m 1.4 GHz...2 GHz IEC 61000-4-3 || 1 V/m 2...2.7 GHz IEC 61000-4-3
- Lsb Value:
- 10 mV
- Mercury Free:
- Yes
- Mechanical Durability:
- 20000000 cycles transistor output
- Control Signal Type:
- A/B || single phase || pulse/direction
- Transmission Rate:
- 1.2...115.2 kbit/s (115.2 kbit/s by default) 15-15 m RS485 || 1.2...115.2 kbit/s (115.2 kbit/s by default) 3-3 m RS232 || 480 Mbit/s USB
- Discrete Output Current:
- 0.5 A
- Realtime Clock:
- with
- Circularity Profile:
- ENVEOLI1403012EN
- Operating Altitude:
- 0...6561.68 ft (0...2000 m)
- Data Backed Up:
- 256 kB built-in flash memory backup of application and data
- Discrete Input Voltage Type:
- DC
- China Rohs Regulation:
- X
- Analogue Input Number:
- 2 0...10 V
- Product Or Component Type:
- logic controller
- Resistance To Conducted Disturbances:
- 10 V 0.15...80 MHz IEC 61000-4-6 || 3 V 0.1...80 MHz Marine specification (LR, ABS, DNV, GL) || 10 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) Marine specification (LR, ABS, DNV, GL)
- Discrete Input Current:
- 7 mA discrete input || 5 mA fast input
- Configurable Filtering Time:
- 0 ms input || 3 ms input || 12 ms input
- Execution Time For 1 Kinstruction:
- 0.3 ms event and periodic task
- Clock Drift:
- <= 30 s/month 25-25 °C
- Height:
- 90 mm
- Execution Time Per Instruction:
- 0.2 µs Boolean
- Protection Type:
- without protection
- Maximum Power Consumption In W:
- 13 W 24 V with max number of I/O expansion module) || 4.1 W 24 V without I/O expansion module)
- Net Weight:
- 0.77 kg
- Pvc Free:
- Yes
- Range Of Product:
- Modicon M221
- Shock Resistance:
- 147 m/s² 11 ms
- Data Storage Equipment:
- 2 GB SD card optional)
- Exct Time For Event Task:
- 60 µs response time
- Sustainable Offer Status:
- Green Premium product
- Resistance To Magnetic Fields:
- 30 A/m 50/60 Hz IEC 61000-4-8
- California Proposition 65:
- WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
- Maximum Cable Distance Between Devices:
- shielded cable <10 m fast input || unshielded cable <30 m output || unshielded cable <30 m digital input || unshielded cable <1 m analog input || shielded cable <3 m fast output
- Electrical Connection:
- removable screw terminal block for inputs || removable screw terminal block for outputs || terminal block, 3 for connecting the 24 V DC power supply || connector, 4 for analogue inputs || mini B USB 2.0 connector for a programming terminal
- Analogue Input Resolution:
- 10 bits
- Resistance To Electrostatic Discharge:
- 8 kV in air IEC 61000-4-2 || 4 kV on contact IEC 61000-4-2
- Discrete Output Number:
- 10 transistor 2 fast output
- Absolute Accuracy Error:
- +/- 1 % of full scale analog input
- Immunity To Microbreaks:
- 10 ms
- Function Available:
- frequency generator || PLS || PWM
- Storage Altitude:
- 0-3000 m
- Depth:
- 70 mm
- Inrush Current:
- 35 A
- Width:
- 110 mm
- Integrated Connection Type:
- USB port mini B USB 2.0 || non isolated serial link serial 1 RJ45 RS485 || non isolated serial link serial 2 RJ45 RS232/RS485
- Battery Type:
- BR2032 or CR2032X lithium non-rechargeable
- Voltage State 1 Guaranteed:
- >= 15 V input
- Conversion Time:
- 1 ms per channel + 1 controller cycle time analog input
- Catalog:
- View
- Datasheet:
- View
