Schneider Electric TM3TI4G Module Tm3-4 Inputs Temperature Spring

(No reviews yet) Write a Review
SKU:
TM3TI4G
UPC:
3.60648E+12
Condition:
New
Pollution Degree:
2
Resistance To Electrostatic Discharge:
8 kV in air IEC 61000-4-2 || 4 kV on contact IEC 61000-4-2
Analogue Input Number:
4
Absolute Accuracy Error:
+/- 0.2 % of full scale at 25 °C for analogue input voltage/current || +/- 0.2 % of full scale at 25 °C for Pt 100/Pt 1000, Ni 100/ Ni 1000 temperature probe || +/- 0.2 % of full scale at 25 °C for thermocouple C 0...2315 °C || +/- 6 °C at 25 °C for
Insulation:
between input and supply 1500 V AC || between input and internal logic 500 V AC
Ambient Air Temperature For Operation:
-10-55 °C horizontal installation || -10-35 °C vertical installation
Range Of Product:
Modicon TM3
Depth:
70 mm
Range Compatibility:
Modicon M221 || Modicon M241 || Modicon M251 || Modicon M262
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Lsb Value:
2.44 mV 0...10 V voltage || 4.88 mV - 10...10 V voltage || 4.88 µA 0...20 mA current || 3.91 µA 4...20 mA current || 0.1 °C temperature probe || 0.1 °C thermocouple
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Height:
90 mm
Analogue Input Resolution:
16 bits || 15 bits + sign
Product Certifications:
CE || UKCA || RCM || EAC || cULus || cULus HazLoc
Input Impedance:
<= 50 Ohm current || >= 1 MOhm voltage || >= 1 MOhm thermocouple || >= 1 MOhm temperature probe
Resistance To Electromagnetic Fields:
10 V/m 80 MHz...1 GHz IEC 61000-4-3 || 3 V/m 1.4 GHz...2 GHz IEC 61000-4-3 || 1 V/m 2 GHz...3 GHz IEC 61000-4-3
Rohs Exemption Information:
Yes
China Rohs Regulation:
X
Mercury Free:
Yes
Environmental Disclosure:
ENVPEP1402009EN
Shock Resistance:
15 gn 11 ms
Current Consumption:
45 mA 5 V DC via bus connector || 50 mA 5 V DC via bus connector || 35 mA 24 V DC via external supply || 40 mA 24 V DC via external supply
Storage Altitude:
0-3000 m
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Ip Degree Of Protection:
IP20
Pvc Free:
Yes
Supply Voltage Limits:
20.4-28.8 V
Electrical Connection:
10 x 1.5 mm² removable screw terminal block pitch 3.81 mm for inputs and supply || 10 x 1.5 mm² removable screw terminal block pitch 3.81 mm for inputs
Immunity To Microbreaks:
10 ms
Type Of Cable:
twisted shielded pairs cable <30 m input
Ambient Air Temperature For Storage:
-25-70 °C
Repeat Accuracy:
+/-0.5 %FS
Surge Withstand:
1 kV power supply common mode IEC 61000-4-5 || 0.5 kV power supply differential mode IEC 61000-4-5 || 1 kV input common mode IEC 61000-4-5
Temperature Drift:
+/- 0.01 %FS/°C
Product Or Component Type:
analog input module
Net Weight:
0.1 kg
Sampling Duration:
10 ms voltage/current || 100 ms voltage/current || 100 ms thermocouple || 100 ms temperature probe
Electromagnetic Emission:
radiated emissions 40 dBμV/m QP class A 10 m)30-230 MHz IEC 55011 || radiated emissions 47 dBμV/m QP class A 10 m)230-1000 MHz IEC 55011
Mounting Support:
top hat type TH35-15 rail IEC 60715 || top hat type TH35-7.5 rail IEC 60715 || plate or panel with fixing kit
Marking:
CE
Local Signalling:
for PWR 1 LED (green)
Resistance To Conducted Disturbances:
10 V 0.15...80 MHz IEC 61000-4-6 || 3 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) Marine specification (LR, ABS, DNV, GL)
Relative Humidity:
10-95 %, without condensation in operation) || 10-95 %, without condensation in storage)
Cross Talk:
<= 1 LSB
Resistance To Magnetic Fields:
30 A/m IEC 61000-4-8
Vibration Resistance:
3.5 mm 5-8.4 Hz DIN rail || 3 gn 8.4-150 Hz DIN rail
Analogue Input Type:
current 4...20 mA || current 0...20 mA || voltage 0...10 V || voltage - 10...10 V || thermocouple - 200...1000 °C thermocouple J || thermocouple - 200...1300 °C thermocouple K || thermocouple 0...1760 °C thermocouple R || thermocouple 0...1760 °C the
Permissible Continuous Overload:
13 V voltage || 40 mA current
Conversion Time:
100 ms + 100 ms per channel + 1 controller cycle time thermocouple || 100 ms + 100 ms per channel + 1 controller cycle time temperature probe || 10 ms + 10 ms per channel + 1 controller cycle time voltage/current
Non-Linearity:
+/- 0.2 %FS
Sustainable Offer Status:
Green Premium product
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Toxic Heavy Metal Free:
Yes
[Us] Rated Supply Voltage:
24 V DC
Circularity Profile:
ENVEOLI1402009EN
Operating Altitude:
0...6561.68 ft (0...2000 m)
Width:
23.6 mm
Standards:
IEC 61131-2
Resistance To Fast Transients:
1 kV IEC 61000-4-4 I/O)
  • Schneider Electric TM3TI4G Module Tm3-4 Inputs Temperature Spring
  • Schneider Electric TM3TI4G Module Tm3-4 Inputs Temperature Spring
$328.75

Description

This product is part of the Modicon TM3 range, an offer of expansion I/O modules for Modicon M221, M241, M251 and M262. The analogue input module provides 4 inputs with 16bit and 15bit + sign resolution. It is an input module with a rated supply voltage of 24V DC and a current consumption of 45mA/50mA at 5V DC via bus connector, 35mA/40mA at 24V DC via external supply. This product is capable of controlling variable speed drives or any device equipped with a current or voltage input. There is an insulation between input and supply at 1500V AC, input and internal logic at 500V AC. It is furnished with removable spring terminal for electrical connection with pitch 3.81mm adjustment for inputs and supply. It is an IP20 rated product. Its dimensions are 23.6mm (Width) x 70mm (Depth) x 90mm (Height). It weighs 0.1kg. This product is certified by CE. It meets EN/IEC 61131-2 and EN/IEC 61010-2-201 standards. This module is compatible with Modicon M262, Modicon M241, Modicon M251 and Modicon M221 logic controller. It supports top hat type TH35-15, top hat type TH35-7.5 rail conforming to IEC 60715 and plate or panel with fixing kit mount. Modicon TM3 expansion modules have been designed with a simple interlocking assembly mechanism. A bus expansion connector is used to distribute data and the power supply when assembling the Modicon TM3 modules with logic controllers. Boost the performance of your controller with the Modicon TM3 I/O system specially designed for the Modicon M221, M241 and M251 logic controllers.
View AllClose