Schneider Electric

Schneider Electric XPSMC16ZC Safety Controller With 16 Imputs

(No reviews yet) Write a Review
SKU:
XPSMC16ZC
UPC:
3389119010252
Condition:
New
Maximum Line Resistance:
100 Ohm <2000 m
Output Type:
2 relays, 2 NO contacts (4 NO total) || solid state, 6, volt-free
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Exchange Size:
14 words
Minimum Output Current:
10 mA relay output
[Ui] Rated Insulation Voltage:
300 V 2)IEC 60647-5-1, DIN VDE 0110 part 1
Safety Level:
can reach PL e/category 4 EN 954-1/EN/ISO 13849-1 || can reach SIL 3 IEC 61508
Associated Fuse Rating:
16 A gL power supply || 4 A gL relay output || 6 A fast blow relay output
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Parity:
even Modbus || no Modbus || odd Modbus
Response Time:
configurable : 20 ms or 30 ms with software XPSMCWIN
Breaking Capacity:
2 A 24 V static output circuit || 1.5 A 24 V DC-13)50 ms relay output
Output Thermal Current:
4 A for both outputs simultaneously || 6 A for 1 output and 2 A for the other relay output
Product Or Component Type:
configurable safety controller
Ambient Air Temperature For Operation:
-10-55 °C
Ambient Air Temperature For Storage:
-25-85 °C
Minimum Output Voltage:
17 V relay output
Mounting Support:
mounting plate
Standards:
IEC 61496-1 || EN 574/ISO 13851 || EN 1760-1/ISO 13856-1 || IEC 61508 || EN 954-1/EN/ISO 13849-1 || IEC 60947-5-1 || IEC 60204-1
Safety Use Category:
category 4 maximum EN 954-1/EN/ISO 13849-1 || PLE maximum ISO 13849-1 || SIL 3 maximum IEC 61508
Circularity Profile:
ENVEOLI1406025EN
[Us] Rated Supply Voltage:
24 V DC - 20...20 %
[Uc] Control Circuit Voltage:
28.8 V
Number Of Inputs:
16
Input Protection Type:
external fuse 16 A
Environmental Disclosure:
ENVPEP1406025EN
Communication Port Protocol:
CANopen 1 SUB-D 9-pin male, serial link 20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 800 kbps or 1 Mbps || Modbus 1 RJ45, serial link 1200 bps, 2400 bps, 4800 bps, 9600 bps or 19200 bps
Breaking Capacity:
180 VA holding AC-15 C300 relay output || 1800 VA inrush AC-15 C300 relay output
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Safety Module Name:
XPSMC
Number Of Addresses:
1-127 CANopen || 1-247 Modbus
Range Of Product:
Preventa Safety automation
Width:
74 mm
Supported Modbus Function:
01 8-bit output data/32-bit input data || 02 32-bit input data/8-bit output data || 03 information and errors
Function Of Module:
dynamic monitoring of hydraulic valves on linear presses || eccentric press || emergency stop monitoring, with or without time delay, 1 or 2-channel wiring || enabling switch monitoring, 2 or 3 contacts || foot switch monitoring || guard monitoring f
Sustainable Offer Status:
Green Premium product
Height:
151.5 mm
China Rohs Regulation:
X
[Uimp] Rated Impulse Withstand Voltage:
4 kV III IEC 60647-5-1, DIN VDE 0110 part 1
Net Weight:
0.82 kg
Product Certifications:
UL || TÜV || CSA
Pvc Free:
Yes
Local Signalling:
32 LEDs
Mercury Free:
Yes
Synchronisation Time Between Inputs:
depending on configuration selected
Method Of Access:
slave
Type Of Start:
configurable
Depth:
153 mm
[Ith] Conventional Free Air Thermal Current:
16 A relay output || 6.5 A static output circuit
Ip Degree Of Protection:
IP20 conforming to IEC 60529
Power Consumption In W:
12 W
Warranty:
18 months
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Data Format:
1 start bit/8 data bits || 1 stop bit even or odd || 2 stop bits without parity || RTU (Remote Terminal Unit) mode
Rohs Exemption Information:
Yes
Catalog:
View
Datasheet:
View
$2,160.00

Description

This product is part of the Preventa XPS MP, XPS MC, XPS MCM range, an offer of safety controllers. This safety controller provides 16 inputs and 32 LEDs for signalling. It is a safety controller with a power consumption of 12W, control circuit voltage of 28.8V and a rated supply voltage of 24V DC. Supported communication port protocols are Modbus with RJ45 port, CANopen with 9-way SUB-D male port. It is an IP20 rated product. Its dimensions are 74mm (Width) x 153mm (Depth) x 151.5mm (Height). It weighs 0.82kg. It is designed to provide a solution for safety applications requiring conformity to Performance Level PL e/Category 4 EN/ISO 13849-1 and SIL3 EN/IEC 61508. This product is certified by UL, CSA and TUV. It meets EN 574/ISO 13851, EN 1760-1/ISO 13856-1, EN/IEC 61496-1, EN/IEC 60204-1, EN/IEC 60947-5-1, EN 954-1/EN/ISO 13849-1 and IEC 61508 standards. Simple, it features redundancy principle micro-processor based technology to provide advanced functions, flexibility regarding the choice of safety function and more precise diagnostics are just some of its advantages. Safety controller XPS MC is configured with a simple software environment where functions are mapped to the various controller outputs according to the application requirements.
View AllClose