Schneider Electric XPSUEP14AP Safety Module Uep Cat.4 24V Screw

(No reviews yet) Write a Review
SKU:
XPSUEP14AP
UPC:
3606489601775
Condition:
New
Function Of Module:
safety output extension
Range Of Product:
Harmony Safety Automation
Auxiliary Contact Composition:
4 NO redundant || 2 NC single
Rohs Exemption Information:
Yes
[Ith] Conventional Free Air Thermal Current:
0.333333333333333
Relative Humidity:
5-95 % non-condensing
Power Consumption In Va:
3.5 VA 24 V AC 50/60 Hz
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Ip Degree Of Protection:
IP20 terminals)IEC 60529 || IP40 housing)IEC 60529 || IP54 mounting area)IEC 60529
Safety Module Name:
XPSUEP
Input Protection Type:
internal, electronic
Depth:
120 mm
Electrical Circuit Type:
addition to Preventa XPSU base module
Power Consumption In W:
1.5 W 24 V DC
Associated Fuse Rating:
10 A gG NO relay output circuit IEC 60947-1 || 4 A gG NC relay output circuit IEC 60947-1
Maximum Response Time On Input Open:
20 ms
Safety Level:
can reach PL e/category 4 for normally open relay contact ISO 13849-1 || can reach SILCL 3 for normally open relay contact IEC 62061 || can reach SIL 3 for normally open relay contact IEC 61508 || can reach PL c/category 1 for normally closed relay c
China Rohs Regulation:
X
Number Of Inputs:
0 extension bus 24 V DC 5
Width:
22.5 mm
Maximum Line Resistance:
60 Ohm
Safety Reliability Data:
MTTFd > 30 years ISO 13849-1 || Dcavg >= 99 % ISO 13849-1 || PFHd = 0.97E-09 ISO 13849-1 || HFT = 1 IEC 62061 || PFHd = 0.97E-09 IEC 62061 || SFF > 99% IEC 62061 || HFT = 1 IEC 61508-1 || PFHd = 0.97E-09 IEC 61508-1 || SFF > 99% IEC 61508-1 || type =
Standards:
IEC 60947-5-1 || IEC 61508-1 functional safety standard || IEC 61508-2 functional safety standard || IEC 61508-3 functional safety standard || IEC 61508-4 functional safety standard || IEC 61508-5 functional safety standard || IEC 61508-6 functional
Height:
100 mm
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Mercury Free:
Yes
Safety Module Application:
for extending number of safety contacts
Mounting Support:
35 mm symmetrical DIN rail
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
[Uimp] Rated Impulse Withstand Voltage:
4 kV II IEC 60947-1
Input Compatibility:
normally closed circuit ISO 14119 || XC limit switch ISO 14119 || mechanical contact ISO 14119 || normally closed circuit ISO 13850 || antivalent pair ISO 14119 || OSSD pair IEC 61496-1-2 || 3-wire proximity sensors PNP
Circularity Profile:
ENVEOLI1811003EN
Product Or Component Type:
safety module
Environmental Disclosure:
ENVPEP1811003EN
Minimum Output Current:
10 mA relay output
Ambient Air Temperature For Storage:
-25-85 °C
Sustainable Offer Status:
Green Premium product
Product Certifications:
TÜV || cULus
[Ie] Rated Operational Current:
5 A AC-1 for normally open relay contact || 3 A AC-15 for normally open relay contact || 5 A DC-1 for normally open relay contact || 3 A DC-13 for normally open relay contact
Local Signalling:
for power ON LED (green) || for error LED (red) || for safety output status LED (yellow)
[Ui] Rated Insulation Voltage:
250 V 2)IEC 60947-1
Connections - Terminals:
removable screw terminal block, 0.2...2.5 mm² solid or flexible || removable screw terminal block, 0.25...2.5 mm² flexible with ferrule single conductor || removable screw terminal block, 0.2...1.5 mm² solid or flexible twin conductor || removable sc
Minimum Output Voltage:
12 V relay output
Pvc Free:
Yes
[Us] Rated Supply Voltage:
24 V AC - 15...10 % || 24 V DC - 20...20 %
Net Weight:
0.200 kg
  • Schneider Electric XPSUEP14AP Safety Module Uep Cat.4 24V Screw
  • Schneider Electric XPSUEP14AP Safety Module Uep Cat.4 24V Screw
  • Schneider Electric XPSUEP14AP Safety Module Uep Cat.4 24V Screw
$271.17

Description

This safety relay is designed for extending the number of safety contacts. The safety relay is powered with 24V AC/DC, and equipped with a screw removable terminal block. This universal safety module embeds pre-defined safety functions, or selectable safety functions via rotary selectors. This safety relay embeds a safety extension bus, 4 NO and 2 single NC safety outputs. The maximum safety level achieved by this safety relay is PLe/Category 4 conforming to ISO 13849-1, SILCL 3 conforming to IEC 62061, SIL 3 conforming to IEC 61508. This safety relay weighs 0,200kg. Its dimensions are 22,5mm (Width) x 120mm (Depth) x 100mm (Height). This safety relay weighs 0,200kg. Its dimensions are 22,5mm (Width) x 120mm (Depth) x 100mm (Height). This safety relays is suitable for applications such as Food and Beverage, Hoisting, Material Handling, Material Working, Packaging. This safe relay conforms to IEC60947-5-1, IEC61508-1/2/3, ISO13849-1, IEC62061 functional safety standards, is certified by cULus, TÜV, EAC, CCC and KC marking. XPSUEP can be only used with XPSUAF, XPSUAK, XPSUAT, XPSUDN and XPSUS safety modules. This relay is mounted on a 35mm symmetrical DIN rail. Harmony XPS Basic and Universal safety relays are the first choice for managing single safety functions easily, typically in machines of simple to medium complexity. Harmony XPS Universal is the first choice for a broad range of simple to mid-complex machines.
View AllClose