Schneider Electric ZBRRH Configurable Receiver For Harmony Hub
SKU:
ZBRRH
UPC:
3606481477071
MPN:
Condition:
New
Rohs Exemption Information:
Yes
Max Power Consumption In W:
1 mW
Marking:
CE
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Operating Position:
any position without derating
Insulation Resistance:
> 500 MOhm 500 V DC NF C 20-030
Status Led:
1 LED Green power ON || 1 LED green and yellow reception signal || 4 LEDs Green relay ON
Maximum Switching Current:
0.2 mA DC
Standards:
EN/IEC 60947-5-1
Short-Circuit Protection:
0.4 A fuse fast blow
Height:
108 mm
Antenna Gain:
0 dBi
Rated Short-Duration Power Frequency Withstand Voltage:
1 kV 50 Hz EN/IEC 60947-5-1
Radio Agreement:
RSS || SRRC || ANATEL || ARIB T66 || FCC || ICASA
Maximum Power Consumption In W:
20 W DC
Response Time:
< 30 ms after transmitter clicks
Ip Degree Of Protection:
IP20 IEC 60529 casing) || IP20 terminals)
California Proposition 65:
WARNING: This product can expose you to chemicals including: Nickel compounds, which is known to the State of California to cause cancer, and Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other repr
Output Type:
transistor PNP
[Ui] Rated Insulation Voltage:
60 V IEC 60664-1
Device Short Name:
ZBRRH
Depth:
75 mm
Relative Humidity:
90-90 % -20-55 °C, without condensation ETSI EN 300 440-1
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Product Or Component Type:
wireless receiver
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Channels Utilisation:
1 Harmony Hub per receiver
Antenna Type:
omnidirectional
Housing Material:
self-extinguishing plastic
Vibration Resistance:
+/- 7.5 mm 5-14 Hz)IEC 60068-2-6 || 2 gn 8-150 Hz)IEC 60068-2-6
Minimum Switching Current:
10 mA 5 V DC
Circularity Profile:
ENVEOLI1103010EN
Warranty:
18 months
Function Of Module:
bi-stable
Mounting Support:
35 mm symmetrical DIN rail conforming to EN/IEC 60715 || mounting plate
Tightening Torque:
0.5-1 N.m EN/IEC 60947-1
Time Delay Range:
0.5 s - 15...15 %)
Electromagnetic Compatibility:
immunity for industrial environments conforming to EN/IEC 61000-6-2 || conducted and radiated emissions class B conforming to CISPR 22 || electrostatic discharge immunity test - test level: 8 kV (in free air (in insulating parts)) conforming to IEC 6
Ambient Air Temperature For Storage:
-40-70 °C
Communication Port Protocol:
Zigbee green power 2.4 GHz IEEE 802.15.4
Width:
36 mm
Maximum Sensing Distance:
100 m in free field || 25 m transmitter in a plastic box type XAL D and receiver in a metal enclosure || 40 m transmitter in box type XAL D, receiver in metal enclosure and use relay-antenna
Pollution Degree:
2 IEC 60664-1
Product Certifications:
CCC || CSA || GOST || C-tick || UL
Product Specific Application:
interface to Harmony hub
[Uimp] Rated Impulse Withstand Voltage:
0.8 kV
Shock Resistance:
10 gn 16 ms) 6000 shocks IEC 60068-2-27
Overvoltage Category:
III IEC 60664-1
Electrical Connection:
1 conductor cable 0.14-2.5 mm² - AWG 26...AWG 14 - solid - without cable end IEC 60947-1 || 2 conductors cable 0.14-1.5 mm² - AWG 26...AWG 16 - solid - without cable end IEC 60947-1 || 1 conductor cable 0.14-4 mm² - AWG 26...AWG 12 - flexible - wi
This Harmony XB4 flush wireless and batteryless push button and receiver unit set is supplied with a set of 10 colored caps and uses a 24V to 240V AC input. It has a metal bezel. This wireless...
This ready-to-use pack is part of the range diameter 22mm wireless and batteryless pushbuttons XB4R metal. This pack comprises one wireless and batteryless metallic pushbutton assembled on fixing...
This ready-to-use pack is part of the range diameter 22mm wireless and batteryless pushbuttons XB5R plastic. This pack comprises one wireless and batteryless pushbutton assembled on fixing collar, in...
This is a DDR4 memory used with Box PCs of Schneider Electric's Harmony P6 range. This is a 8GB, 260-pin SO-DIMM, DDR4-2400 memory. It weighs 0.14Kg. They are compatible with all Harmony P6 Advanced...
This is a DDR4 memory used with Box PCs of Schneider Electric's Harmony P6 range. This is a 4GB, 260-pin SO-DIMM, DDR4-2400 memory. It weighs 0.14Kg. They are compatible with all Harmony P6 Advanced...
This Harmony XB5, flush black wireless push button and receiver unitset is supplied with 24V DC input and is mounted in a plastic handybox. This wireless batteryless push button with handybox is...
This ready-to-use pack is part of the range diameter 22mm wireless and batteryless pushbuttons XB5R plastic. This pack comprises one wireless and batteryless pushbutton assembled on fixing collar and...
This is a DDR4 memory used with Box PCs of Schneider Electric's Harmony P6 range. This is a 16GB, 260-pin SO-DIMM, DDR4-2400 memory. It weighs 0.14Kg. They are compatible with all Harmony P6 Advanced...
This Harmony XB5, flush black wireless push button and receiver unit set is supplied with a 24V DC input. This wireless batteryless push button provides a simple and reliable solution for remote...