SMC 10-ZS-28-A | Clean Room Power Supply and Output Connection Cable for ISE/PSE Sensors
SMC
$30.00
The SMC 10-ZS-28-A is a clean room specification power supply and output connection cable designed for SMC digital pressure switches and sensors. Part number decoded: ZS = sensor cable series, 28 = power supply/output cable type (distinguished from the ZS-26 sensor signal cable), A = connector configuration. The 10- prefix designates clean room specification with low particle generation materials suitable for controlled environments.
While the ZS-26 series provides the sensor signal connection, the ZS-28 series provides the power supply input and analog/digital output connection between the sensor and the control system. This cable carries the operating voltage to the sensor and returns the measurement output signal (typically 4-20mA analog, 1-5V, or NPN/PNP switching output depending on the sensor model) to the PLC analog input module or digital input card. Proper cable separation between power/output (ZS-28) and sensor signal (ZS-26) paths reduces electrical noise interference in clean room environments with sensitive instrumentation.
The ZS-28-A pairs with SMC ISE20A, ISE20C, PSE300, PSE540, and PSE560 series sensors. For sensor signal cables, the ZS-26 series provides the complementary connection. Verify the connector type (A configuration) matches the specific sensor model before ordering, as different ISE/PSE variants use different connector interfaces. Both ZS-26 and ZS-28 cables are required for a complete sensor installation. Clean series (10-) materials. RoHS compliant.
- Series:
- 10-ZS (Clean Room)
- Product Type:
- Power Supply/Output Connection Cable
- Compatible With:
- ISE/PSE Digital Pressure Switches
- Connector:
- A-Type
- Function:
- Power Supply + Output Signal
- Clean Room Grade:
- Particle Generation Grade 1
- Certifications:
- RoHS
