Terminal blocks, protectors, distribution blocks

Linergy NEMA sectional terminal blocks are for terminating wires in a control panel and are designed to NEMA standards. This terminal block has pressure wire connectors for use with solid or stranded copper wires from #18 through #12 AWG. Each pressure...

Terminal block, Linergy TR, screw type, knife disconnect, 2 points, 2.5mm², with test point, grey

The Linergy line of terminal blocks offers a wide selection of blocks and accessories. Linergy terminal blocks have push-in type, spring type, and screw type terminal blocks. This green/yellow grounding terminal block has 3 terminal points. This terminal...

The Linergy line of terminal blocks offers a wide selection of blocks and accessories. Linergy terminal blocks have push-in type, spring type, and screw type terminal blocks. This grey grounding terminal block has 3 terminal points. This terminal block...

Terminal block, Linergy TR, green, 4mm2, passthrough, 2 points, set of 10

Terminal block, spring type, basic disconnect terminal, 2 points, 2.5mm², grey

Marking card, Linergy TR, flat, 6mm, unprinted with 6 strips, 60 characters, White, set of 10

Mini terminal block, Linergy TR, blue, 2.5 mm2, passthrough, 2 points, for 15mm din rail

Screw terminal, Linergy TR, disconnect, measuring transducer, 2 points, 6mm², grey

Linergy TR is terminal block for Linergy. It belongs to linergy earth terminal block with 10 mm² nominal cross section. It has green-yellow surface treatment. Mounting by clip-on and sideways connection by single-level 1x1 screw terminals. It could be...

Screw terminal, Linergy TR, feed through, measuring transducer, 2 points, 6mm², grey

Terminal block, Linergy TR, push-in type, 4 points, 2.5mm², double level, protective earth, green-yellow, set of 50

Terminal block, Linergy TR, spring type, protective earth, 4 points, 4mm², green-yellow, set of 50

Terminal block, Linergy TR, screw type, knife disconnect, 2 points, 4mm², with test point, orange

Terminal block, Linergy TR, push-in type, feed through, 2 level, 4 points, 2.5mm², blue, set of 50

Terminal block, Linergy TR, grey, 2.5mm², push-in type, knife disconnect, 3 points, set of 50

Warning label, Linergy TR terminals blocks, for 2.5mm² screw terminal blocks, yellow

Linergy TR is terminal block for Linergy. It belongs to linergy passthrough terminal block with 4 mm² nominal cross section. The rated operational voltage is 600V conforming to CSA/cURus, 1000V conforming to EN/IEC 60947-7-1 and 690V conforming to ATEX...

Terminal block, Linergy TR, orange, 4mm2, passthrough, 2 points, set of 10

Terminal block, Linergy TR, grey, 2.5mm², push-in type, knife disconnect, 2 points, set of 50