Universal Robots UR17g-1300 Cobot, 15kg Payload (17.5kg Extended), 1300mm Reach, g-Series Gen 7, CB7 Core Controller, PolyScope X

Universal Robots
SKU:
202464
$63,354.67
Condition:
New
Current Stock:

Universal Robots | g-Series Collaborative Robot | Gen 7 Platform

1300 mm Reach at 5 m/s. Compact, Lightweight, Built for AI-Ready Automation.

15 kg Payload (17.5 kg Extended) 1300 mm Reach ±0.05 mm Repeatability 5 m/s Max TCP Speed IP65 Rated 23 Safety Functions CB7 Core Controller PolyScope X

1300 mm Reach. 5 m/s. Built on Gen 7.

The Universal Robots UR17g-1300 is the mid-reach arm in UR's new g-Series, part of the Gen 7 platform launched at IMTS 2026, and the successor to the UR15. It carries a 15 kg payload, with an extended payload of up to 17.5 kg, across a 1300 mm reach at up to 5 m/s TCP speed with ±0.05 mm repeatability, in a compact, lightweight form factor built to keep cycle times tight as task complexity grows.

The new g-Series tool flange delivers 24/48 V power (5 A peak, 3 A continuous), integrated 1 Gb Ethernet, and safety-rated inputs directly at the tool, so cameras, sensors, and higher-power end-of-arm tools connect without external cabling. The arm pairs with the CB7 Core controller and TP7 Core teach pendant, and runs PolyScope X as its native operating system.

With an enclosed, IP65-rated joint design, 23 configurable safety functions, and a Ø204 mm footprint, the UR17g-1300 covers larger work envelopes for palletizing, machine tending, material handling, and vision-guided applications where reach and cycle time both matter. Automation Distribution offers the UR17g-1300 in six configurations with the standalone CB7 Core or cabinet-mount CB7 Core Compact controller and 6 m or 12 m robot cables.


At a Glance

Robot Model UR17g-1300 (g-Series, Gen 7), successor to the UR15
Payload 15 kg (33.1 lbs)
Extended Payload Up to 17.5 kg (38.58 lbs), per UR payload chart
Reach 1300 mm (51.18 in)
Pose Repeatability (ISO 9283) ±0.05 mm
Maximum TCP Speed 5 m/s
Degrees of Freedom 6 rotating joints (2-1-3 joint architecture)
Robot Weight 40.7 kg (89.7 lbs); 43.4 kg (95.7 lbs) including cable
Footprint (base diameter) Ø204 mm (8.03 in)
IP Rating (Arm) IP65, enclosed joint design
Operating Temperature 0–50°C (32–122°F), reduced performance from 35°C
Power Consumption 550 W (max)  |  350 W (average)
Noise <55 dB(A)
Configurable Safety Functions 23
Safety Standards EN ISO 13849-1, PLd Category 3  |  EN ISO 10218-1  |  UL 1740
Tool Flange ISO 9409-1-50-4-M6, g-Series flange with 24/48 V power and 1 Gb Ethernet
Controller CB7 Core or CB7 Core Compact
Teach Pendant TP7 Core with 3-position enabling device (or no pendant on OEM configurations)
Software Platform PolyScope X
Successor to the UR15
Universal Robots names the UR17g-1300 as the successor to the UR15. It sits between the compact UR18g-950 and the long-reach UR10g-1750, with 350 mm more reach than the UR18g-950, a 5 m/s TCP speed, and up to 17.5 kg of payload in the same Ø204 mm footprint, on the Gen 7 tool flange, CB7 Core controller, and PolyScope X.

Why the UR17g-1300

1300 mm Reach at 5 m/s
Reach across wider conveyors, full pallet footprints, and deeper machine enclosures at up to 5 m/s TCP speed, in a compact, lightweight form factor that keeps cycle times tight as tasks grow more complex. Any-orientation mounting covers floor, wall, ceiling, and gantry installs.

15 kg Payload, 17.5 kg Extended
A 15 kg standard payload, with an extended payload of up to 17.5 kg per UR's payload chart, covers heavier grippers, multi-part tooling, and end-of-arm vision packages.

Power, Data, and Safety at the Tool
The g-Series tool flange delivers 24/48 V power (5 A peak, 3 A continuous), 1 Gb Ethernet for cameras and sensors, M8 I/O with digital I/O, analog in, and RS-485, plus safety-rated inputs. Higher-power grippers and vision systems connect at the flange, with no external cable runs along the arm.

CB7 Core Controller
The new CB7 Core adds compute headroom in a 20% smaller footprint, with three 1 GbE ports, 16 configurable digital inputs and outputs, a 24 VDC 4 A I/O supply, an IP54 enclosure, and field-replaceable cables. The CB7 Core Compact version mounts directly inside your electrical cabinet or machine.

PolyScope X, Built for AI
PolyScope X is the native operating system for the entire Gen 7 platform, with open APIs and an SDK for building and running AI applications, onboard logic programs for sequencing without an external PLC, and Smart Skills for common tasks.

IP65 Enclosed Joint Design
Fewer components and an enclosed joint design give the UR17g-1300 IP65 protection against dust and water, for washdown and harsh production environments. An LED light ring at the base shows cell status across the shop floor.

Collaborative Safety Architecture
23 configurable safety functions, PLd Category 3 per EN ISO 13849-1, EN ISO 10218-1 and UL 1740 compliance, and an integrated force/torque sensor support collaborative deployment alongside operators, subject to a site-specific risk assessment.


Common Applications

The UR17g-1300 is built for mid-to-heavy payload work across a larger envelope: palletizing, machine tending, and material handling where reach and cycle time both matter, with tool-side power and Ethernet to run vision and higher-power end effectors.

Universal Robots cobot palletizing labeled cartons onto a pallet from an inline conveyor at the Nutriset food production facility

Palletizing & Pick and Place
With 1300 mm of reach and speeds up to 5 m/s, the UR17g-1300 covers standard pallet footprints and wider conveyor spans from a single base position. A 15 kg payload, extendable to 17.5 kg, covers case weight plus the gripper and tooling plate.

Operator hand-teaching a Universal Robots cobot at a Hurco CNC machining center, teach pendant in hand, heavy machined parts on the infeed table

Machine Tending
1300 mm of reach accesses deeper CNC enclosures and multi-machine layouts, and 15 kg of payload (17.5 kg extended) handles dual grippers and heavier parts. The integrated force/torque sensor confirms part seating before the machine cycle starts.

Universal Robots cobot with a THG Automation welding torch firing a live arc on a sheet metal fixture in a collaborative welding cell

Welding
1300 mm of reach covers larger weld envelopes on fabricated parts, and ±0.05 mm repeatability supports consistent torch positioning with heavier welding end effectors.

Vision-Guided and AI-Enabled Picking
1 Gb Ethernet and 24/48 V power at the tool flange let cameras and sensors run at the end of the arm without external cabling, and PolyScope X provides open APIs and an SDK for AI applications that run with the robot in real time.

Heavy Material Handling
Transfer castings, assemblies, and fabricated parts between conveyors, fixtures, and workstations, removing repetitive heavy lifting from the workforce.

Screwdriving & Fastening
Higher-power screwdriving tools draw from the flange's 24/48 V supply, with force/torque feedback to verify fastener engagement on every cycle.

Industries Where the UR17g-1300 Excels
Food & beverage packaging and palletizing, automotive and tier suppliers, CNC job shops, metal fabrication and welding, electronics, consumer goods, plastics and injection moulding, and any operation where heavy, fast, repetitive handling limits throughput.

Collaborative & Safe at High Payload

The UR17g-1300 carries 23 configurable safety functions, certified by TÜV Rheinland to EN ISO 13849-1 (PLd Category 3) and EN ISO 10218-1, plus UL 1740. In appropriate applications, and with the right safety configuration, it can work in shared workspaces alongside operators.

Risk Assessment Required: All cobot deployments, regardless of payload, require a site-specific risk assessment per ISO 10218-2 and ISO/TS 15066. The UR17g-1300's certified safety functions support risk mitigation but do not replace the risk assessment obligation. Contact Automation Distribution or a certified UR integrator to evaluate your installation.

Configurable Safety Functions 23
Safety Rating PLd Category 3 (EN ISO 13849-1), TÜV Rheinland
Robot Safety Standard EN ISO 10218-1, TÜV Rheinland
North American Certification UL 1740, TÜV Rheinland cTÜVus
Regulatory CE Declaration of Incorporation, KC Mark, RoHS
Force/Torque Sensing Integrated sensor: ±150 N force range, ±10 Nm torque range
3PE Enabling Device Built into the TP7 Core pendant on all pendant configurations: 5 ambidextrous 3PE buttons plus emergency stop, per EN ISO 10218-1:2025
Safety Inputs at the Tool Safety input on the M8 I/O tool connector, plus a safety input on the optional SP7 Smart Panel interface

Which g-Series Arm Do You Need?

All three g-Series arms share the Gen 7 tool flange, CB7 Core controller, TP7 Core pendant, PolyScope X, IP65 protection, and the same Ø204 mm footprint. The difference is the balance of payload, reach, and speed.

SpecificationUR17g-1300UR18g-950UR10g-1750
Payload 15 kg (17.5 kg extended) 18 kg 8 kg (10 kg extended)
Reach 1300 mm 950 mm 1750 mm
Repeatability ±0.05 mm ±0.05 mm ±0.08 mm
Max TCP Speed 5 m/s 4 m/s 5 m/s
Robot Weight 40.7 kg 39.2 kg 44.7 kg
Footprint Ø204 mm Ø204 mm Ø204 mm
Best For Balanced reach and payload: palletizing, machine tending, material handling Highest payload in a compact envelope: fast pick and place, gantry mounting Longest reach: large work envelopes, wide conveyor spans

Need more payload in a tighter envelope? See the UR18g-950. Need the longest reach? The UR10g-1750 covers 1750 mm. Contact Automation Distribution to discuss your application: 1-888-600-3080.


Software & Controller

The UR17g-1300 runs PolyScope X on the CB7 Core controller family. Both controller versions offer the same control functionality; the difference is how they mount.

PolyScope X

Gen 7 Operating System

  • Native operating environment for the entire Gen 7 platform
  • Open APIs and SDK for building and running AI applications
  • Onboard logic programs for sequencing without an external PLC
  • Smart Skills, assignable to the optional SP7 Smart Panel's configurable buttons
  • Fully compatible with the UR+ ecosystem

Available: All UR17g-1300 configurations

CB7 Core Controller

Standalone and Compact Versions

  • CB7 Core: enclosed control box for use in the robot cell
  • CB7 Core Compact: no outer enclosure, mounts inside your electrical cabinet or machine (bracket included)
  • 3x 1 GbE ports, 16 configurable DI / 16 DO, 24 VDC 4 A I/O supply
  • IP54 enclosure (CB7 Core) with field-replaceable cables
  • Modbus TCP, EtherNet/IP adapter, and PROFINET

Available: SKU 202464, 202463 (Core) | 202297, 202298, 202300, 202301 (Compact)


Choose Your UR17g-1300 Configuration

The UR17g-1300 is available in six configurations. Every variant uses the same robot arm and runs PolyScope X; the differences are the controller version, the teach pendant, and the robot cable length. Every pendant configuration includes the TP7 Core with a 3-position enabling device.

SKUControllerTeach PendantRobot CableBest For
202464 CB7 Core TP7 Core, 5 m cable 6 m Standard robot cell, new deployments
202463 CB7 Core TP7 Core, 12 m cable 12 m Large cells, controller placed away from the arm
202297 CB7 Core Compact TP7 Core, 5 m cable 6 m Controller in your cabinet, with pendant
202298 CB7 Core Compact TP7 Core, 12 m cable 12 m Controller in your cabinet, extended cable runs
202300 CB7 Core Compact None (OEM) 6 m Machine builders, PLC or custom HMI control
202301 CB7 Core Compact None (OEM) 12 m Machine builders, extended cable runs
Not sure which SKU to order?
  • New robot cell with a standalone controller? → Start with SKU 202464 (CB7 Core, TP7 Core, 6 m cable).
  • Controller needs to sit farther from the arm? → Choose SKU 202463 (CB7 Core, TP7 Core, 12 m cable).
  • Mounting the controller inside your electrical cabinet? → Choose SKU 202297 (6 m) or 202298 (12 m) with the CB7 Core Compact and TP7 Core pendant.
  • Building the robot into a machine with no pendant? → Choose SKU 202300 (6 m) or 202301 (12 m), CB7 Core Compact without teach pendant.

Full Technical Specifications

Robot Arm

Joint Architecture 2-1-3
Base Size Size 4 g-Series
Base Flange Connector Harting plug
Materials Aluminium, plastic, steel
Control Loop Frequency 500 Hz
Status Indication LED light ring at robot base
Dimensional Tolerance ±0.1 mm, ±0.5°
Compatible Controllers CB7 Core, CB7 Core Compact, CB7 Core Compact 0.55 m
Mounting Any orientation

Axis Movement

JointWorking RangeMaximum Speed
Base ±360° ±180°/s
Shoulder ±360° ±180°/s
Elbow ±360° ±240°/s
Wrist 1 ±360° ±300°/s
Wrist 2 ±360° ±300°/s
Wrist 3 ±360° ±300°/s

Force/Torque Sensor

ParameterForce (x-y-z)Torque (x-y-z)
Range ±150.0 N ±10.0 Nm
Precision ±7.5 N ±0.2 Nm
Accuracy ±8.3 N ±0.5 Nm

g-Series Tool Flange

M8 Power Connector M8-4 A-coded 4-pin female (IEC 61076-2-104); 24 or 48 VDC, 3 A continuous, 5 A peak (max 2 sec)
M12 Ethernet Connector M12 X-coded female (IEC 61076-2-109); 1 Gb Ethernet
M8 I/O Connector M8-8 A-coded 8-pin female (IEC 61076-2-104); 2 digital in or 1 safety input, 2 digital out, 2 analog in or 1 RS-485; 12 or 24 VDC, 2 A (dual pin), 1 A (single pin)
SP7 Smart Panel Interface (optional) 3 digital in and 1 safety input, 4 digital out, 5 VDC; supports the detachable SP7 Smart Panel (2PE Freedrive, 3 configurable buttons)
Mechanical Interface ISO 9409-1-50-4-M6

CB7 Core / CB7 Core Compact Controller

Digital I/O 16 configurable in, 16 configurable out (8 dual-channel safety pairs), 4 quadrature digital in
Analog I/O 2 analog in, 2 analog out
I/O Power Supply 24 V, 4 A
Ethernet 3x RJ-45, 10/100/1000 Mbps
USB 2x USB-A, 2x USB-C
Fieldbus Modbus TCP, EtherNet/IP adapter, PROFINET
Power Input C14 inlet, 100–240 VAC, 47–440 Hz
CB7 Core Size / Weight 393 × 284 × 201 mm (W × H × D); 12.4 kg (27.3 lbs)
CB7 Core Compact Size / Weight 387 × 158 × 201 mm (W × H × D); 9.1 kg (20.1 lbs)
IP Classification IP54 (CB7 Core); IP20 (CB7 Core Compact, for cabinet mounting)
Ambient Temperature 0–50°C, reduced performance from 35°C
Humidity 90% RH, non-condensing
Noise <55 dB(A)
Robot Cable 6 m or 12 m depending on SKU; Gen 7 cables with integrated Ethernet and Harting connectors
Supported Cable Lengths Robot cable 1–40 m; teach pendant cable 5–40 m

TP7 Core Teach Pendant

Display 11.6 in touchscreen, 1920 × 1080 (Full HD), integrated virtual joystick
3-Position Enabling Device 5 ambidextrous 3PE buttons, per EN ISO 10218-1:2025
Emergency Stop Dedicated E-stop button
IP Classification IP54
Size (W × H × D) 302 × 241 × 25 mm
Weight 1.415 kg (3.12 lbs) including 1 m pendant cable
Ergonomics More than 20% lighter than previous generations, multiple grip positions, configurable smart buttons
Cable Length 5 m or 12 m, depending on SKU

Training & Support

UR Academy
Free online training with step-by-step programming tutorials, troubleshooting guides, and certification courses for PolyScope X. New users are typically productive within a single day.

UR Care Services
24/7 support, remote connectivity monitoring, and on-site field service. Contact Automation Distribution for UR Care and UR Care Premium pricing for the UR17g-1300.

UR+ Marketplace
Certified third-party grippers, vision systems, screwdriving tools, welding packages, and URCaps. Gen 7 is fully compatible with UR+ and designed to work with the g-Series out of the box.

Automation Distribution Support
As an authorized Universal Robots distributor, Automation Distribution provides pre-sales application engineering, controller and tooling configuration guidance, and post-sale support for the UR17g-1300. Contact us before ordering to confirm the right configuration for your cell.


Resources & Downloads

UR17g-1300 Product Family | SKU 202464, 202463, 202297, 202298, 202300, 202301. Specifications sourced from the Universal Robots UR17g-1300 datasheet, g-Series User Manual, UR17g-1300 product page, and CB7 Core User Manual (November 2026). Verify all specifications against current Universal Robots documentation prior to installation. Specifications subject to change without notice. A site-specific risk assessment per ISO 10218-2 and ISO/TS 15066 is required prior to any collaborative deployment. Automation Distribution, Authorized Universal Robots Distributor, Hatfield, PA.

Payload:
15 kg (33.1 lbs)
Reach:
1300 mm (51.2 in)
Weight:
43.4 kg (95.7 lbs)
Footprint:
Ø 204 mm