Universal Robots UR17g-1300 Cobot, 15kg Payload (17.5kg Extended), 1300mm Reach, g-Series Gen 7, CB7 Core Controller, PolyScope X
Universal Robots
Universal Robots | g-Series Collaborative Robot | Gen 7 Platform
1750 mm Reach. 10 kg Extended Payload. The Long-Reach g-Series Cobot.
The Universal Robots UR10g-1750 is the long-reach arm in UR's new g-Series, part of the Gen 7 platform launched at IMTS 2026, and the successor to the UR8 Long. It carries an 8 kg payload, with an extended payload of up to 10 kg, across a 1750 mm reach at up to 5 m/s TCP speed with ±0.08 mm repeatability, building on the precise linear motion and high-speed acceleration of the UR8 Long.
The new g-Series tool flange delivers 24/48 V power (5 A peak, 3 A continuous), integrated 1 Gb Ethernet, and safety-rated inputs directly at the tool, so cameras, sensors, and higher-power end-of-arm tools connect without external cabling. The arm pairs with the CB7 Core controller and TP7 Core teach pendant, and runs PolyScope X as its native operating system.
With an enclosed, IP65-rated joint design, 23 configurable safety functions, and a Ø204 mm footprint, the UR10g-1750 covers the largest work envelopes in the g-Series for palletizing, wide conveyor spans, multi-machine tending, and large-part handling. Automation Distribution offers the UR10g-1750 in six configurations with the standalone CB7 Core or cabinet-mount CB7 Core Compact controller and 6 m or 12 m robot cables.
| Robot Model | UR10g-1750 (g-Series, Gen 7), successor to the UR8 Long |
| Payload | 8 kg (17.6 lbs) |
| Extended Payload | Up to 10 kg (22 lbs), per UR payload chart |
| Reach | 1750 mm (68.9 in) |
| Pose Repeatability (ISO 9283) | ±0.08 mm |
| Maximum TCP Speed | 5 m/s |
| Degrees of Freedom | 6 rotating joints (2-1-3 joint architecture) |
| Robot Weight | 44.7 kg (98.5 lbs); 47.3 kg (104.3 lbs) including cable |
| Footprint (base diameter) | Ø204 mm (8.03 in) |
| IP Rating (Arm) | IP65, enclosed joint design |
| Operating Temperature | 0–50°C (32–122°F), reduced performance from 35°C |
| Power Consumption | 615 W (max) | 350 W (average) |
| Noise | <55 dB(A) |
| Configurable Safety Functions | 23 |
| Safety Standards | EN ISO 13849-1, PLd Category 3 | EN ISO 10218-1 | UL 1740 |
| Tool Flange | ISO 9409-1-50-4-M6, g-Series flange with 24/48 V power and 1 Gb Ethernet |
| Controller | CB7 Core or CB7 Core Compact |
| Teach Pendant | TP7 Core with 3-position enabling device (or no pendant on OEM configurations) |
| Software Platform | PolyScope X |
1750 mm Reach at 5 m/s
The longest reach in the g-Series covers full pallet footprints, wide conveyor spans, and multiple machines from one base position, at up to 5 m/s TCP speed with the precise linear motion and high-speed acceleration of the UR8 Long. Any-orientation mounting covers floor, wall, ceiling, and gantry installs.
8 kg Payload, 10 kg Extended
An 8 kg standard payload, with an extended payload of up to 10 kg per UR's payload chart, covers grippers, vacuum tooling, and end-of-arm vision packages across the full 1750 mm envelope.
Power, Data, and Safety at the Tool
The g-Series tool flange delivers 24/48 V power (5 A peak, 3 A continuous), 1 Gb Ethernet for cameras and sensors, M8 I/O with digital I/O, analog in, and RS-485, plus safety-rated inputs. Higher-power grippers and vision systems connect at the flange, with no external cable runs along the arm.
CB7 Core Controller
The new CB7 Core adds compute headroom in a 20% smaller footprint, with three 1 GbE ports, 16 configurable digital inputs and outputs, a 24 VDC 4 A I/O supply, an IP54 enclosure, and field-replaceable cables. The CB7 Core Compact version mounts directly inside your electrical cabinet or machine.
PolyScope X, Built for AI
PolyScope X is the native operating system for the entire Gen 7 platform, with open APIs and an SDK for building and running AI applications, onboard logic programs for sequencing without an external PLC, and Smart Skills for common tasks.
IP65 Enclosed Joint Design
Fewer components and an enclosed joint design give the UR10g-1750 IP65 protection against dust and water, for washdown and harsh production environments. An LED light ring at the base shows cell status across the shop floor.
Collaborative Safety Architecture
23 configurable safety functions, PLd Category 3 per EN ISO 13849-1, EN ISO 10218-1 and UL 1740 compliance, and an integrated force/torque sensor support collaborative deployment alongside operators, subject to a site-specific risk assessment.
The UR10g-1750 is built for work where reach is the constraint: palletizing to full stack height, multi-machine tending, wide conveyor spans, and large parts, with tool-side power and Ethernet to run vision and higher-power end effectors.

Palletizing & Pick and Place
1750 mm of reach covers full pallet footprints and taller stack heights from a single base position, and reaches across wide conveyor spans at up to 5 m/s. An 8 kg payload, extendable to 10 kg, covers lighter cases, bags, and trays plus the gripper.

Multi-Machine Tending
1750 mm of reach lets one arm serve two machines or reach deep into large enclosures from a single position. The integrated force/torque sensor confirms part seating before the machine cycle starts.

Welding
1750 mm of reach covers large weld envelopes on long fabricated parts, reducing repositioning between seams, with ±0.08 mm repeatability for consistent torch positioning.
Vision-Guided and AI-Enabled Picking
1 Gb Ethernet and 24/48 V power at the tool flange let cameras and sensors run at the end of the arm without external cabling, and PolyScope X provides open APIs and an SDK for AI applications that run with the robot in real time.
Large-Part and Long-Distance Handling
Transfer long or bulky parts between conveyors, fixtures, and workstations spread across a wide cell, removing repetitive reaching and lifting from the workforce.
Screwdriving & Fastening
Higher-power screwdriving tools draw from the flange's 24/48 V supply, with force/torque feedback to verify fastener engagement on every cycle.
The UR10g-1750 carries 23 configurable safety functions, certified by TÜV Rheinland to EN ISO 13849-1 (PLd Category 3) and EN ISO 10218-1, plus UL 1740. In appropriate applications, and with the right safety configuration, it can work in shared workspaces alongside operators.
Risk Assessment Required: All cobot deployments, regardless of payload, require a site-specific risk assessment per ISO 10218-2 and ISO/TS 15066. The UR10g-1750's certified safety functions support risk mitigation but do not replace the risk assessment obligation. Contact Automation Distribution or a certified UR integrator to evaluate your installation.
| Configurable Safety Functions | 23 |
| Safety Rating | PLd Category 3 (EN ISO 13849-1), TÜV Rheinland |
| Robot Safety Standard | EN ISO 10218-1, TÜV Rheinland |
| North American Certification | UL 1740, TÜV Rheinland cTÜVus |
| Regulatory | CE Declaration of Incorporation, KC Mark, RoHS |
| Force/Torque Sensing | Integrated sensor: ±150 N force range, ±10 Nm torque range |
| 3PE Enabling Device | Built into the TP7 Core pendant on all pendant configurations: 5 ambidextrous 3PE buttons plus emergency stop, per EN ISO 10218-1:2025 |
| Safety Inputs at the Tool | Safety input on the M8 I/O tool connector, plus a safety input on the optional SP7 Smart Panel interface |
All three g-Series arms share the Gen 7 tool flange, CB7 Core controller, TP7 Core pendant, PolyScope X, IP65 protection, and the same Ø204 mm footprint. The difference is the balance of payload, reach, and speed.
| Specification | UR10g-1750 | UR17g-1300 | UR18g-950 |
|---|---|---|---|
| Payload | 8 kg (10 kg extended) | 15 kg (17.5 kg extended) | 18 kg |
| Reach | 1750 mm | 1300 mm | 950 mm |
| Repeatability | ±0.08 mm | ±0.05 mm | ±0.05 mm |
| Max TCP Speed | 5 m/s | 5 m/s | 4 m/s |
| Robot Weight | 44.7 kg | 40.7 kg | 39.2 kg |
| Footprint | Ø204 mm | Ø204 mm | Ø204 mm |
| Best For | Longest reach: palletizing to full stack height, multi-machine tending, wide conveyor spans | Balanced reach and payload: palletizing, machine tending, material handling | Highest payload in a compact envelope: fast pick and place, gantry mounting |
Need more payload? The UR17g-1300 handles up to 17.5 kg at 1300 mm, and the UR18g-950 handles 18 kg at 950 mm. Contact Automation Distribution to discuss your application: 1-888-600-3080.
The UR10g-1750 runs PolyScope X on the CB7 Core controller family. Both controller versions offer the same control functionality; the difference is how they mount.
PolyScope X
Gen 7 Operating System
Available: All UR10g-1750 configurations
CB7 Core Controller
Standalone and Compact Versions
Available: SKU 202283, 202285 (Core) | 202287, 202288, 202290, 202462 (Compact)
The UR10g-1750 is available in six configurations. Every variant uses the same robot arm and runs PolyScope X; the differences are the controller version, the teach pendant, and the robot cable length. Every pendant configuration includes the TP7 Core with a 3-position enabling device.
| SKU | Controller | Teach Pendant | Robot Cable | Best For |
|---|---|---|---|---|
| 202283 | CB7 Core | TP7 Core, 5 m cable | 6 m | Standard robot cell, new deployments |
| 202285 | CB7 Core | TP7 Core, 12 m cable | 12 m | Large cells, controller placed away from the arm |
| 202287 | CB7 Core Compact | TP7 Core, 5 m cable | 6 m | Controller in your cabinet, with pendant |
| 202288 | CB7 Core Compact | TP7 Core, 12 m cable | 12 m | Controller in your cabinet, extended cable runs |
| 202290 | CB7 Core Compact | None (OEM) | 6 m | Machine builders, PLC or custom HMI control |
| 202462 | CB7 Core Compact | None (OEM) | 12 m | Machine builders, extended cable runs |
Robot Arm
| Joint Architecture | 2-1-3 |
| Base Size | Size 4 g-Series |
| Base Flange Connector | Harting plug |
| Materials | Aluminium, plastic, steel |
| Control Loop Frequency | 500 Hz |
| Status Indication | LED light ring at robot base |
| Dimensional Tolerance | ±0.1 mm, ±0.5° |
| Compatible Controllers | CB7 Core, CB7 Core Compact, CB7 Core Compact 0.55 m |
| Mounting | Any orientation |
Axis Movement
| Joint | Working Range | Maximum Speed |
|---|---|---|
| Base | ±360° | ±180°/s |
| Shoulder | ±360° | ±180°/s |
| Elbow | ±360° | ±240°/s |
| Wrist 1 | ±360° | ±300°/s |
| Wrist 2 | ±360° | ±300°/s |
| Wrist 3 | ±360° | ±300°/s |
Force/Torque Sensor
| Parameter | Force (x-y-z) | Torque (x-y-z) |
|---|---|---|
| Range | ±150.0 N | ±10.0 Nm |
| Precision | ±7.5 N | ±0.2 Nm |
| Accuracy | ±8.3 N | ±0.5 Nm |
g-Series Tool Flange
| M8 Power Connector | M8-4 A-coded 4-pin female (IEC 61076-2-104); 24 or 48 VDC, 3 A continuous, 5 A peak (max 2 sec) |
| M12 Ethernet Connector | M12 X-coded female (IEC 61076-2-109); 1 Gb Ethernet |
| M8 I/O Connector | M8-8 A-coded 8-pin female (IEC 61076-2-104); 2 digital in or 1 safety input, 2 digital out, 2 analog in or 1 RS-485; 12 or 24 VDC, 2 A (dual pin), 1 A (single pin) |
| SP7 Smart Panel Interface (optional) | 3 digital in and 1 safety input, 4 digital out, 5 VDC; supports the detachable SP7 Smart Panel (2PE Freedrive, 3 configurable buttons) |
| Mechanical Interface | ISO 9409-1-50-4-M6 |
CB7 Core / CB7 Core Compact Controller
| Digital I/O | 16 configurable in, 16 configurable out (8 dual-channel safety pairs), 4 quadrature digital in |
| Analog I/O | 2 analog in, 2 analog out |
| I/O Power Supply | 24 V, 4 A |
| Ethernet | 3x RJ-45, 10/100/1000 Mbps |
| USB | 2x USB-A, 2x USB-C |
| Fieldbus | Modbus TCP, EtherNet/IP adapter, PROFINET |
| Power Input | C14 inlet, 100–240 VAC, 47–440 Hz |
| CB7 Core Size / Weight | 393 × 284 × 201 mm (W × H × D); 12.4 kg (27.3 lbs) |
| CB7 Core Compact Size / Weight | 387 × 158 × 201 mm (W × H × D); 9.1 kg (20.1 lbs) |
| IP Classification | IP54 (CB7 Core); IP20 (CB7 Core Compact, for cabinet mounting) |
| Ambient Temperature | 0–50°C, reduced performance from 35°C |
| Humidity | 90% RH, non-condensing |
| Noise | <55 dB(A) |
| Robot Cable | 6 m or 12 m depending on SKU; Gen 7 cables with integrated Ethernet and Harting connectors |
| Supported Cable Lengths | Robot cable 1–40 m; teach pendant cable 5–40 m |
TP7 Core Teach Pendant
| Display | 11.6 in touchscreen, 1920 × 1080 (Full HD), integrated virtual joystick |
| 3-Position Enabling Device | 5 ambidextrous 3PE buttons, per EN ISO 10218-1:2025 |
| Emergency Stop | Dedicated E-stop button |
| IP Classification | IP54 |
| Size (W × H × D) | 302 × 241 × 25 mm |
| Weight | 1.415 kg (3.12 lbs) including 1 m pendant cable |
| Ergonomics | More than 20% lighter than previous generations, multiple grip positions, configurable smart buttons |
| Cable Length | 5 m or 12 m, depending on SKU |
UR Academy
Free online training with step-by-step programming tutorials, troubleshooting guides, and certification courses for PolyScope X. New users are typically productive within a single day.
UR Care Services
24/7 support, remote connectivity monitoring, and on-site field service. Contact Automation Distribution for UR Care and UR Care Premium pricing for the UR10g-1750.
UR+ Marketplace
Certified third-party grippers, vision systems, screwdriving tools, welding packages, and URCaps. Gen 7 is fully compatible with UR+ and designed to work with the g-Series out of the box.
Automation Distribution Support
As an authorized Universal Robots distributor, Automation Distribution provides pre-sales application engineering, controller and tooling configuration guidance, and post-sale support for the UR10g-1750. Contact us before ordering to confirm the right configuration for your cell.
UR10g-1750 Product Family | SKU 202283, 202285, 202287, 202288, 202290, 202462. Specifications sourced from the Universal Robots UR10g-1750 datasheet, g-Series User Manual, UR10g-1750 product page, and CB7 Core User Manual (November 2026). Verify all specifications against current Universal Robots documentation prior to installation. Specifications subject to change without notice. A site-specific risk assessment per ISO 10218-2 and ISO/TS 15066 is required prior to any collaborative deployment. Automation Distribution, Authorized Universal Robots Distributor, Hatfield, PA.