Universal Robots UR18g-950 Cobot, 18kg Payload, 950mm Reach, g-Series Gen 7, CB7 Core Controller, PolyScope X

Universal Robots
SKU:
202310
$65,089.67
Condition:
New
Current Stock:

Universal Robots | g-Series Collaborative Robot | Gen 7 Platform

The Compact Heavy-Duty Cobot. 18 kg Payload. Built for AI-Ready Automation.

18 kg Payload 950 mm Reach ±0.05 mm Repeatability 4 m/s Max TCP Speed IP65 Rated 23 Safety Functions CB7 Core Controller PolyScope X

18 kg in a Compact 950 mm Envelope. Built on Gen 7.

The Universal Robots UR18g-950 is the compact heavy-duty cobot in UR's new g-Series, part of the Gen 7 platform launched at IMTS 2026. It carries an 18 kg payload across a 950 mm reach at up to 4 m/s TCP speed with ±0.05 mm repeatability, supporting larger end effectors and heavier parts while staying light enough to mount on most standard gantry systems.

What sets the UR18g apart from the UR18 is the platform around the arm. The new g-Series tool flange delivers 24/48 V power (5 A peak, 3 A continuous), integrated 1 Gb Ethernet, and safety-rated inputs directly at the tool, so cameras, sensors, and higher-power end-of-arm tools connect without external cabling. The arm pairs with the CB7 Core controller and TP7 Core teach pendant, and runs PolyScope X as its native operating system.

With an enclosed, IP65-rated joint design, 23 configurable safety functions, and a Ø204 mm footprint, the UR18g-950 is built for fast pick-and-place, palletizing, machine tending, and vision-guided applications where cycle time and end-of-arm capability both matter. Automation Distribution offers the UR18g-950 in six configurations with the standalone CB7 Core or cabinet-mount CB7 Core Compact controller and 6 m or 12 m robot cables.


At a Glance

Robot Model UR18g-950 (g-Series, Gen 7)
Maximum Payload 18 kg (39.7 lbs)
Reach 950 mm (37.4 in)
Pose Repeatability (ISO 9283) ±0.05 mm
Maximum TCP Speed 4 m/s
Degrees of Freedom 6 rotating joints (2-1-3 joint architecture)
Robot Weight 39.2 kg (86.4 lbs); 42 kg (92.6 lbs) including cable
Footprint (base diameter) Ø204 mm (8.03 in)
IP Rating (Arm) IP65, enclosed joint design
Operating Temperature 0–50°C (32–122°F), reduced performance from 35°C
Power Consumption 570 W (max)  |  350 W (average)
Noise <55 dB(A)
Configurable Safety Functions 23
Safety Standards EN ISO 13849-1, PLd Category 3  |  EN ISO 10218-1  |  UL 1740
Tool Flange ISO 9409-1-50-4-M6, g-Series flange with 24/48 V power and 1 Gb Ethernet
Controller CB7 Core or CB7 Core Compact
Teach Pendant TP7 Core with 3-position enabling device (or no pendant on OEM configurations)
Software Platform PolyScope X
Same 18 kg / 950 mm Envelope as the UR18, Rebuilt for Gen 7
The UR18g-950 keeps the UR18's payload, reach, repeatability, and footprint, and adds the g-Series tool flange, the CB7 Core controller, the TP7 Core pendant, 23 safety functions, and a quieter enclosed-joint arm. For new heavy-duty cobot cells, it is the Gen 7 path forward.

Why the UR18g-950

18 kg Payload, Gantry-Friendly Weight
The UR18g-950 supports larger end effectors and heavier parts while remaining light enough for easy mounting on most standard gantry systems. Any-orientation mounting covers floor, wall, ceiling, and gantry installs.

Power, Data, and Safety at the Tool
The g-Series tool flange delivers 24/48 V power (5 A peak, 3 A continuous), 1 Gb Ethernet for cameras and sensors, M8 I/O with digital I/O, analog in, and RS-485, plus safety-rated inputs. Higher-power grippers and vision systems connect at the flange, with no external cable runs along the arm.

CB7 Core Controller
The new CB7 Core adds compute headroom in a 20% smaller footprint, with three 1 GbE ports, 16 configurable digital inputs and outputs, a 24 VDC 4 A I/O supply, an IP54 enclosure, and field-replaceable cables. The CB7 Core Compact version mounts directly inside your electrical cabinet or machine.

PolyScope X, Built for AI
PolyScope X is the native operating system for the entire Gen 7 platform, with open APIs and an SDK for building and running AI applications, onboard logic programs for sequencing without an external PLC, and Smart Skills for common tasks.

IP65 Enclosed Joint Design
Fewer components and an enclosed joint design give the UR18g-950 IP65 protection against dust and water, for washdown and harsh production environments. An LED light ring at the base shows cell status across the shop floor.

Collaborative Safety Architecture
23 configurable safety functions, PLd Category 3 per EN ISO 13849-1, EN ISO 10218-1 and UL 1740 compliance, and an integrated force/torque sensor support collaborative deployment alongside operators, subject to a site-specific risk assessment.


Common Applications

The UR18g-950 is built for high-payload, shorter-reach work where cycle time matters: fast pick-and-place, end-of-line palletizing, and heavy machine tending, with the tool-side power and Ethernet to run vision and higher-power end effectors.

Universal Robots cobot palletizing labeled cartons onto a pallet from an inline conveyor at the Nutriset food production facility

Fast Pick & Place and Palletizing
With 18 kg of payload and speeds up to 4 m/s, the UR18g-950 is built for fast-paced pick-and-place where reducing cycle time is the goal. Payload headroom covers case weight plus the gripper and tooling plate, and the light arm mounts on standard gantry systems for multi-pallet and high-layer configurations.

Operator hand-teaching a Universal Robots cobot at a Hurco CNC machining center, teach pendant in hand, heavy machined parts on the infeed table

Heavy Machine Tending
Dual grippers, heavy fixtures, and large machined parts push effective payload well above the part weight alone. The UR18g-950 handles these load and unload cycles at 18 kg, and the integrated force/torque sensor confirms part seating before the machine cycle starts.

Universal Robots cobot with a THG Automation welding torch firing a live arc on a sheet metal fixture in a collaborative welding cell

Welding
Torch packages, wire feeders, and fixturing all consume payload before the weld begins. The UR18g-950's 18 kg rating and ±0.05 mm repeatability support consistent torch positioning with heavier welding end effectors.

Vision-Guided and AI-Enabled Picking
1 Gb Ethernet and 24/48 V power at the tool flange let cameras and sensors run at the end of the arm without external cabling, and PolyScope X provides open APIs and an SDK for AI applications that run with the robot in real time.

Heavy Material Handling
Transfer castings, assemblies, and fabricated parts between conveyors, fixtures, and workstations, removing repetitive heavy lifting from the workforce.

Screwdriving & Fastening
Higher-power screwdriving tools draw from the flange's 24/48 V supply, with force/torque feedback to verify fastener engagement on every cycle.

Industries Where the UR18g-950 Excels
Food & beverage packaging and palletizing, automotive and tier suppliers, CNC job shops, metal fabrication and welding, electronics, consumer goods, plastics and injection moulding, and any operation where heavy, fast, repetitive handling limits throughput.

Collaborative & Safe at High Payload

The UR18g-950 carries 23 configurable safety functions, certified by TÜV Rheinland to EN ISO 13849-1 (PLd Category 3) and EN ISO 10218-1, plus UL 1740. In appropriate applications, and with the right safety configuration, it can work in shared workspaces alongside operators.

Risk Assessment Required: All cobot deployments, regardless of payload, require a site-specific risk assessment per ISO 10218-2 and ISO/TS 15066. The UR18g-950's certified safety functions support risk mitigation but do not replace the risk assessment obligation. Contact Automation Distribution or a certified UR integrator to evaluate your installation.

Configurable Safety Functions 23
Safety Rating PLd Category 3 (EN ISO 13849-1), TÜV Rheinland
Robot Safety Standard EN ISO 10218-1, TÜV Rheinland
North American Certification UL 1740, TÜV Rheinland cTÜVus
Regulatory CE Declaration of Incorporation, KC Mark, RoHS
Force/Torque Sensing Integrated sensor: ±150 N force range, ±10 Nm torque range
3PE Enabling Device Built into the TP7 Core pendant on all pendant configurations: 5 ambidextrous 3PE buttons plus emergency stop, per EN ISO 10218-1:2025
Safety Inputs at the Tool Safety input on the M8 I/O tool connector, plus a safety input on the optional SP7 Smart Panel interface

UR18g-950 vs. UR18: What Changed?

The UR18g-950 and UR18 share the same arm envelope. The difference is the Gen 7 platform: controller, pendant, tool flange, and software.

SpecificationUR18UR18g-950
Payload / Reach 18 kg / 950 mm 18 kg / 950 mm
Repeatability ±0.05 mm ±0.05 mm
Max TCP Speed 4 m/s 4 m/s
IP Rating (Arm) IP65 IP65
Configurable Safety Functions 20 23
Arm Noise <65 dB(A) <55 dB(A)
Tool Flange Power 12/24 V, 2 A (dual pin) 12/24 V, 2 A (M8 I/O) plus 24/48 V, 3 A continuous (M8 power)
Ethernet at the Tool No 1 Gb Ethernet
Controller CB5 (PolyScope 5 or X) CB7 Core / CB7 Core Compact
Teach Pendant 3PE Teach Pendant TP7 Core with 3PE, 11.6 in Full HD display
Software PolyScope 5 & PolyScope X PolyScope X

Expanding an existing PolyScope 5 fleet? The UR18 remains available in PolyScope 5 configurations. For new cells, vision-heavy tooling, or AI-enabled applications, choose the UR18g-950. Contact Automation Distribution to discuss your application: 1-888-600-3080.


Software & Controller

The UR18g-950 runs PolyScope X on the CB7 Core controller family. Both controller versions offer the same control functionality; the difference is how they mount.

PolyScope X

Gen 7 Operating System

  • Native operating environment for the entire Gen 7 platform
  • Open APIs and SDK for building and running AI applications
  • Onboard logic programs for sequencing without an external PLC
  • Smart Skills, assignable to the optional SP7 Smart Panel's configurable buttons
  • Fully compatible with the UR+ ecosystem

Available: All UR18g-950 configurations

CB7 Core Controller

Standalone and Compact Versions

  • CB7 Core: enclosed control box for use in the robot cell
  • CB7 Core Compact: no outer enclosure, mounts inside your electrical cabinet or machine (bracket included)
  • 3x 1 GbE ports, 16 configurable DI / 16 DO, 24 VDC 4 A I/O supply
  • IP54 enclosure (CB7 Core) with field-replaceable cables
  • Modbus TCP, EtherNet/IP adapter, and PROFINET

Available: SKU 202466, 202465 (Core) | 202468, 202308, 202310, 202467 (Compact)


Choose Your UR18g-950 Configuration

The UR18g-950 is available in six configurations. Every variant uses the same robot arm and runs PolyScope X; the differences are the controller version, the teach pendant, and the robot cable length. Every pendant configuration includes the TP7 Core with a 3-position enabling device.

SKUControllerTeach PendantRobot CableBest For
202466 CB7 Core TP7 Core, 5 m cable 6 m Standard robot cell, new deployments
202465 CB7 Core TP7 Core, 12 m cable 12 m Large cells, controller placed away from the arm
202468 CB7 Core Compact TP7 Core, 5 m cable 6 m Controller in your cabinet, with pendant
202308 CB7 Core Compact TP7 Core, 12 m cable 12 m Controller in your cabinet, extended cable runs
202310 CB7 Core Compact None (OEM) 6 m Machine builders, PLC or custom HMI control
202467 CB7 Core Compact None (OEM) 12 m Machine builders, extended cable runs
Not sure which SKU to order?
  • New robot cell with a standalone controller? → Start with SKU 202466 (CB7 Core, TP7 Core, 6 m cable).
  • Controller needs to sit farther from the arm? → Choose SKU 202465 (CB7 Core, TP7 Core, 12 m cable).
  • Mounting the controller inside your electrical cabinet? → Choose SKU 202468 (6 m) or 202308 (12 m) with the CB7 Core Compact and TP7 Core pendant.
  • Building the robot into a machine with no pendant? → Choose SKU 202310 (6 m) or 202467 (12 m), CB7 Core Compact without teach pendant.

Full Technical Specifications

Robot Arm

Joint Architecture 2-1-3
Base Size Size 4 g-Series
Base Flange Connector Harting plug
Materials Aluminium, plastic, steel
Control Loop Frequency 500 Hz
Status Indication LED light ring at robot base
Dimensional Tolerance ±0.1 mm, ±0.5°
Compatible Controllers CB7 Core, CB7 Core Compact, CB7 Core Compact 0.55 m
Mounting Any orientation

Axis Movement

JointWorking RangeMaximum Speed
Base ±360° ±180°/s
Shoulder ±360° ±180°/s
Elbow ±360° ±240°/s
Wrist 1 ±360° ±300°/s
Wrist 2 ±360° ±300°/s
Wrist 3 ±360° ±300°/s

Force/Torque Sensor

ParameterForce (x-y-z)Torque (x-y-z)
Range ±150.0 N ±10.0 Nm
Precision ±7.5 N ±0.2 Nm
Accuracy ±8.3 N ±0.5 Nm

g-Series Tool Flange

M8 Power Connector M8-4 A-coded 4-pin female (IEC 61076-2-104); 24 or 48 VDC, 3 A continuous, 5 A peak (max 2 sec)
M12 Ethernet Connector M12 X-coded female (IEC 61076-2-109); 1 Gb Ethernet
M8 I/O Connector M8-8 A-coded 8-pin female (IEC 61076-2-104); 2 digital in or 1 safety input, 2 digital out, 2 analog in or 1 RS-485; 12 or 24 VDC, 2 A (dual pin), 1 A (single pin)
SP7 Smart Panel Interface (optional) 3 digital in and 1 safety input, 4 digital out, 5 VDC; supports the detachable SP7 Smart Panel (2PE Freedrive, 3 configurable buttons)
Mechanical Interface ISO 9409-1-50-4-M6

CB7 Core / CB7 Core Compact Controller

Digital I/O 16 configurable in, 16 configurable out (8 dual-channel safety pairs), 4 quadrature digital in
Analog I/O 2 analog in, 2 analog out
I/O Power Supply 24 V, 4 A
Ethernet 3x RJ-45, 10/100/1000 Mbps
USB 2x USB-A, 2x USB-C
Fieldbus Modbus TCP, EtherNet/IP adapter, PROFINET
Power Input C14 inlet, 100–240 VAC, 47–440 Hz
CB7 Core Size / Weight 393 × 284 × 201 mm (W × H × D); 12.4 kg (27.3 lbs)
CB7 Core Compact Size / Weight 387 × 158 × 201 mm (W × H × D); 9.1 kg (20.1 lbs)
IP Classification IP54 (CB7 Core); IP20 (CB7 Core Compact, for cabinet mounting)
Ambient Temperature 0–50°C, reduced performance from 35°C
Humidity 90% RH, non-condensing
Noise <55 dB(A)
Robot Cable 6 m or 12 m depending on SKU; Gen 7 cables with integrated Ethernet and Harting connectors
Supported Cable Lengths Robot cable 1–40 m; teach pendant cable 5–40 m

TP7 Core Teach Pendant

Display 11.6 in touchscreen, 1920 × 1080 (Full HD), integrated virtual joystick
3-Position Enabling Device 5 ambidextrous 3PE buttons, per EN ISO 10218-1:2025
Emergency Stop Dedicated E-stop button
IP Classification IP54
Size (W × H × D) 302 × 241 × 25 mm
Weight 1.415 kg (3.12 lbs) including 1 m pendant cable
Ergonomics More than 20% lighter than previous generations, multiple grip positions, configurable smart buttons
Cable Length 5 m or 12 m, depending on SKU

Training & Support

UR Academy
Free online training with step-by-step programming tutorials, troubleshooting guides, and certification courses for PolyScope X. New users are typically productive within a single day.

UR Care Services
24/7 support, remote connectivity monitoring, and on-site field service. Contact Automation Distribution for UR Care and UR Care Premium pricing for the UR18g-950.

UR+ Marketplace
Certified third-party grippers, vision systems, screwdriving tools, welding packages, and URCaps. Gen 7 is fully compatible with UR+ and designed to work with the g-Series out of the box.

Automation Distribution Support
As an authorized Universal Robots distributor, Automation Distribution provides pre-sales application engineering, controller and tooling configuration guidance, and post-sale support for the UR18g-950. Contact us before ordering to confirm the right configuration for your cell.


Resources & Downloads

UR18g-950 Product Family | SKU 202466, 202465, 202468, 202308, 202310, 202467. Specifications sourced from the Universal Robots UR18g-950 datasheet, g-Series User Manual, UR18g-950 product page, and CB7 Core User Manual (November 2026). Verify all specifications against current Universal Robots documentation prior to installation. Specifications subject to change without notice. A site-specific risk assessment per ISO 10218-2 and ISO/TS 15066 is required prior to any collaborative deployment. Automation Distribution, Authorized Universal Robots Distributor, Hatfield, PA.

Payload:
18 kg (39.7 lbs)
Reach:
950 mm (37.4 in)
Weight:
42 kg (92.6 lbs)
Footprint:
Ø 204 mm
Repeatability:
±0.05 mm
Max TCP Speed:
4 m/s
IP Rating:
IP65