Wago

WAGO 2000-5477

(No reviews yet) Write a Review
SKU:
2000-5477
MPN:
2000-5477
Condition:
New
actuation type:
Push-in || Operating tool
approvals per:
C22.2 No 158
color:
Orange
connectable conductor materials:
Copper
connection technology:
Push-in CAGE CLAMP
country of origin sales organisation germany:
DE
depth from upper edge of din rail:
52.4 mm / 2.063 inch
design:
Horizontal type
fine stranded conductor:
0.14 1.5 mm / 24 16 AWG
fine stranded conductor with ferrule push in termination:
0.5 0.75 mm / 20 18 AWG
fine stranded conductor with insulated ferrule:
0.14 0.75 mm / 24 18 AWG
fire load:
0.313 MJ
flammability class per ul94:
V0
height:
97.3 mm / 3.831 inch
insulation material:
Polyamide (PA66)
legend ratings:
(III / 3) Overvoltage category III / Pollution degree 3
marking level:
Center/side marking
mounting type:
DIN-35 rail
nominal cross section:
1 mm
nominal voltage iii 3:
250 V
note conductor cross section:
Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
packaging type:
Box
rated current:
13.5 A
rated current csa use group c:
0.416666666666667
rated current ul use group b:
15 A
rated current ul use group d:
15 A
rated voltage csa use group c:
300 V
rated voltage ul use group b:
300 V
rated voltage ul use group d:
300 V
ratings per:
IEC/EN 60947-7-1
solid conductor:
0.14 1.5 mm / 24 16 AWG
solid conductor push in termination:
0.5 1.5 mm / 20 16 AWG
strip length:
9 11 mm / 0.35 0.43 inch
weight:
21.404 g
width:
7 mm / 0.276 inch
wiring direction:
Front-entry wiring
  • Wago 2000-5477
  • Wago 2000-5477
  • Wago 2000-5477
$19.09

Description

Description 4-conductor sensor supply terminal block; with ground contact; internally commoned 
Remarks Item description:

3.5 mm spacing per signal (2 x 3.5 mm = 7 mm)

The double spacing per pole of this terminal block series maximizes connectivity. For example, ten sensors may be connected using only five sensor terminal blocks plus a power supply terminal block.


 
 
Item properties

Miscellaneous

Name Value Unit
Total number of connection points  10   
Total number of potentials   
Color  orange   
Ratings per  IEC/EN 60947-7-1   
Rated voltage (III / 3) [V]  250 
Rated current [A]  13.5 
Connection technology  Push-in CAGE CLAMP    
Number of connection points connector  10   
Actuation type  Operating tool   
Connectable conductor materials  Copper   
Nominal cross section  1 mm nbsp;  
Solid conductor  0.14 1.5 mm / 24 16 AWG   
Solid conductor, push-in termination  0.5 1.5 mm / 20 16 AWG   
Fine-stranded conductor  0.14 1.5 mm / 24 16 AWG   
Fine-stranded conductor with ferrule, push-in termination fr  0.5 mm / 20 AWG   
Strip length  9 11 mm / 0.35 0.43 Inch   
Type of wiring  Front-entry wiring   
Design  horizontal   
Marking level  Center/side marking   
Insulating material  Polyamide 66 (PA 66)   
Fire load [MJ]  2.596  MJ 
Weight [g]  21.524 
Width  7 mm / 0.276 Inch   
Height from upper-edge of DIN-35 rail  52.4 mm / 2.063 Inch   
Type of mounting  DIN-35 x 15 carrier rail   
.

The Sensr. suppl. terminal block from WAGO's 2000 TOPJOB S series is an orange, quadruple-deck terminal block with ground contact and side/lateral and center marking slots, designed for PNP (high-side) switching sensors. It accommodates 4 conductors and 10 wires with push-in CAGE CLAMP spring connections, suitable for wire sizes ranging from 0.14mm² to 1.5mm² or #24AWG to #16AWG, and has a nominal cross-section of 1mm². The terminal block is rated for a current of 13.5A and is mounted on a DIN-35 rail with a width of 7mm, equivalent to model number 20005477.

View AllClose