null

Automation Distribution helps you design, build, and support high-performance automation cells with SMC, Universal Robots, WAGO, Turck, PULS, Zebra, Yaskawa and more.

Wago 2002-2201

WAGO 2002-2201 Double-Deck Terminal Block, 2-Pole, 24A, 500V, Push-in CAGE CLAMP®, Gray

Wago
SKU:
2002-2201
Availability:
In our warehouse: 174
$4.44
Condition:
New
Current Stock:
Description
Description Double-deck terminal block; Through/through terminal block; L/L; without marker carrier; gray housing; suitable for Ex e II applications 
Remarks  
 
Item properties

Miscellaneous

Name Value Unit
Total number of connection points  4   
Total number of potentials  2   
Potential marking  L/L   
Color  gray   
Ratings per  IEC/EN 60947-7-1   
Rated voltage (III / 3) [V]  500  V 
Rated impulse voltage (III / 3) [kV]  6  kV 
Rated current [A]  24  A 
Rated current (2) [A]  28  A 
Rated voltage EN (Ex e II) [V]  440  V 
Rated current (Ex e II) [A]  20  A 
Rated current (Ex e II) with jumper [A]  18  A 
Number of levels  2   
Connection technology  Push-in CAGE CLAMP    
Number of connection points connector  2   
Actuation type  Operating tool   
Connectable conductor materials  Copper   
Nominal cross section  2.5 mm nbsp;  
Solid conductor  0.25 4 mm / 22 12 AWG   
Solid conductor, push-in termination  0.75 4 mm / 18 12 AWG   
Fine-stranded conductor  0.25 4 mm / 22 12 AWG   
Fine-stranded conductor with ferrule, push-in termination fr  0.75 mm / 18 AWG   
Strip length  10 12 mm / 0.39 0.47 Inch   
Number of connection points connector (2)  2   
Type of wiring  Front-entry wiring   
Design  horizontal   
Marking level  Center/side marking   
Insulating material  Polyamide 66 (PA 66)   
Fire load [MJ]  0.204  MJ 
Weight [g]  10.153  g 
Width  5.2 mm / 0.205 Inch   
Height from upper-edge of DIN-35 rail  51.7 mm / 2.035 Inch   
Depth  69.7 mm / 2.744 Inch   
Type of mounting  DIN-35 x 15 carrier rail   
.

The WAGO 2002 TOPJOB S series feed-through terminal block is a double-deck terminal block with side and center marking slots, suitable for Ex e II applications. It features "L/L" marking, is gray in color, and has 2 feed-through poles accommodating 4 wires (2 push-in + 2 push-in) with a nominal cross-section of 2.5mm², suitable for wire sizes ranging from 0.25mm² to 4mm² or #22AWG to #12AWG. It supports a rated current of 24A or 28A and utilizes Push-in CAGE CLAMP spring connections. The terminal block is designed for mounting on a DIN-35 rail (35 x 15 / 35 x 7.5) and has a width of 5.2mm, equivalent to model 20022201.

Additional Information
actuation type:
Operating tool
color:
Blue
connectable conductor materials:
Copper
connection technology:
Push-in CAGE CLAMP
country of origin sales organisation germany:
PL
depth:
27.5 mm / 1.083 inch
fine stranded conductor:
0.5 4 mm / 20 12 AWG
fire load:
0.822 MJ
height:
30 mm / 1.181 inch
insulation material:
Polyamide (PA66)
legend ratings:
(III / 3) Overvoltage category III / Pollution degree 3
nominal voltage iii 3:
1000 V
note on rated current 1:
Current carrying capacity: With a maximum total current of 96 A, the clamping units of the busbar terminal block can be loaded with the rated current of the conductor cross-sections approved. This only applies when (10 x 3) mm busbars are used.
packaging type:
Box
pole no:
12
rated current:
96 A
rated surge voltage iii 3:
6 kV
solid conductor:
0.5 4 mm / 20 12 AWG
solid conductor push in termination:
0.5 4 mm / 20 12 AWG
stranded conductor:
0.5 4 mm / 20 12 AWG
strip length:
11 mm / 0.43 inch
weight:
35.688 g
width:
75 mm / 2.953 inch
wiring direction:
Front-entry wiring