Description
Multilevel installation terminal block; 4 mm®; L/L/PE; Push-in CAGE CLAMPp>
View AllClose
Electrical Data
- Ratings note: potential - ground
- Rated voltage (III / 3): 250 V
- Rated impulse voltage (III / 3): 4 kV
- Rated current: 32 A
- Ratings note 2: potential-potential
- Rated voltage (III / 3) 2: 400 V
- Rated impulse voltage (III / 3) 2: 6 kV
- Rated current (2): 32 A
- Legend (ratings): (III / 3) Overvoltage category III / Pollution degree 3
Connection Data
- Connection technology: Push-in CAGE CLAMP<sup></sup>
- Actuation type: Operating tool
- Connectable conductor materials: Copper
- Nominal cross section: 2.5 mm
- Solid conductor: 0.25 4 mm / 22 12 AWG
- Solid conductor, push-in termination: 0.75 4 mm / 18 12 AWG
- Fine-stranded conductor: 0.25 4 mm / 22 12 AWG
- Fine-stranded conductor with ferrule with plastic collar: 1 2.5 mm / 18 12 AWG
- Fine-stranded conductor with ferrule, push-in termination, from: 1 2.5 mm / 18 12 AWG
- Strip length: 10 12 mm / 0.39 0.47 inch
- Total number of connection points: 5
- Total number of potentials: 3
- Number of levels: 3
- Type of wiring: Front-entry wiring
- Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross section can also be inserted via push-in termination.
Geometrical Data
- Width: 5.2 mm / 0.205 inch
- Height from upper-edge of DIN-35 rail: 42.3 mm / 1.665 inch
- Depth: 96 mm / 3.78 inch
Mechanical Data
- Design: Angled
- Type of mounting: DIN-35 rail
- Potential marking: L/L/PE
- Marking level: Center/side marking
Material Data
- Color: gray
- Insulating material: Polyamide 66 (PA 66)
- Fire load: 0.245 MJ
- Weight: 16.318 g
Commercial data
- Packaging type: BOX
- Country of origin: DE
- GTIN: 4044918925600
- Customs Tariff No.: 85369010000
The WAGO 2003 TOPJOB S series is a gray, multilevel installation feed-through and ground terminal block featuring three decks and side/center marking slots, marked "L/L/PE." It includes two feed-through poles and a protective-earth connection, accommodating five wires (two push-in and three push-in) with a nominal cross-section of 2.5mm², suitable for wire sizes ranging from 0.25mm² to 4mm² or #22AWG to #12AWG. The terminal block supports rated currents of 24A and 32A, utilizes Push-in CAGE CLAMP spring connections, and is designed for DIN-35 rail mounting with a width of 5.2mm, equivalent to model 20037645.