3-conductor through terminal block, 6 mm², yellow.
The WAGO 2006 TOPJOB S series feed-through terminal block is a yellow, 1-deck/level component with side and center marking slots, suitable for Ex e II applications. It features one feed-through pole (1P) with three push-in wire connections (1+2) and supports a nominal cross-section of 6mm², accommodating wire sizes from 0.5mm² to 10mm² or #20AWG to #8AWG. The terminal block is rated for currents of 41A and 57A and utilizes Push-in CAGE CLAMP spring connections. It is designed for mounting on a DIN-35 rail (35 x 15 / 35 x 7.5) with a width of 7.5mm, equivalent to model 20061306.
- actuation type:
- Push-in || Operating tool
- approvals per:
- CSA 22.2 No 158
- color:
- Yellow
- connectable conductor materials:
- Copper
- connection technology:
- Push-in CAGE CLAMP®
- CONTINUOUS OPERATING TEMPERATURE:
- -60 ¢¦ +105 °C
- COUNTRY OF ORIGIN VKORG GERMANY:
- DE
- CUSTOMS TARIFF NUMBER VKORG GERMANY:
- 85369010000
- DEPTH FROM UPPER EDGE OF DIN RAIL:
- 32.9 mm / 1.295 inches
- FINE STRANDED CONDUCTOR:
- 0.5 ¢¦ 10 mm² / 20 ¢¦ 8 AWG
- FINE STRANDED CONDUCTOR WITH FERRULE PUSH IN TERMINATION:
- 2.5 ¢¦ 6 mm² / 16 ¢¦ 10 AWG
- FINE STRANDED CONDUCTOR WITH INSULATED FERRULE:
- 0.5 ¢¦ 6 mm² / 20 ¢¦ 10 AWG
- FIRE LOAD:
- 0.222 MJ
- FLAMMABILITY CLASS PER UL94:
- V0
- HEIGHT:
- 73.3 mm / 2.886 inches
- INSULATION MATERIAL:
- Polyamide (PA66)
- LEGEND RATINGS:
- (III / 3) ¢ Overvoltage category III / Pollution degree 3
- MARKING LEVEL:
- Center/side marking
- MATERIAL GROUP:
- I
- MEASUREMENT ERROR DEVIATION MAX FROM THE UPPER RANGE VALUE:
- MEASUREMENT ERROR DEVIATION MAX OF THE UPPER RANGE VALUE 2=
- MISMATING PROTECTION:
- MOUNTING NOTE=
- MOUNTING TYPE:
- DIN-35 rail
- NOMINAL CROSS SECTION:
- 6 mm²
- NOMINAL VOLTAGE III 3:
- 800 V
- NOTE CONDUCTOR CROSS SECTION:
- Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
- NOTE MATERIAL DATA:
- Information on material data can be found here
- POWER LOSS PER POLE POTENTIAL:
- 1.3112 W
- PROCESSING TEMPERATURE:
- -35 ¢¦ +85 °C
- PRODUCT GROUP CODE:
- 22
- RATED CURRENT:
- 41 A
- RATED CURRENT 2:
- 57 A
- RATED CURRENT CSA USE GROUP B:
- 50 A
- RATED CURRENT CSA USE GROUP C:
- 50 A
- RATED CURRENT EX E II:
- 36 A
- RATED CURRENT EX E II WITH JUMPER:
- 33 A
- RATED CURRENT IN FOR SPECIFIED POWER LOSS:
- 41 A
- RATED CURRENT UL USE GROUP B:
- 50 A
- RATED CURRENT UL USE GROUP C:
- 50 A
- RATED IMPULSE VOLTAGE III 3:
- 8 kV
- RATED VOLTAGE CSA USE GROUP B:
- 600 V
- RATED VOLTAGE CSA USE GROUP C:
- 600 V
- RATED VOLTAGE EN EX E II:
- 550 V
- RATED VOLTAGE UL USE GROUP B:
- 600 V
- RATED VOLTAGE UL USE GROUP C:
- 600 V
- RATINGS PER:
- IEC/EN 60947-7-1
- REFERENCE HAZARDOUS AREAS:
- See installation notes in section ¢Knowledge¢ andDownloads ¢ Documentation ¢ Additional Information: Technical Section
- RESISTANCE VALUE FOR SPECIFIED CURRENT DEPENDENT POWER LOSS:
- 0.00078 ©
- SOLID CONDUCTOR:
- 0.5 ¢¦ 10 mm² / 20 ¢¦ 8 AWG
- SOLID CONDUCTOR PUSH IN TERMINATION:
- 2.5 ¢¦ 10 mm² / 14 ¢¦ 8 AWG
- STRIP LENGTH:
- 13 ¢¦ 15 mm / 0.51 ¢¦ 0.59 inches
- WEIGHT:
- 12.694 g
- WIDTH:
- 7.5 mm / 0.295 inches
- WIRING DIRECTION:
- Front-entry wiring
