Wago

WAGO 2022-1304

(No reviews yet) Write a Review
SKU:
2022-1304
MPN:
2022-1304
Condition:
New
actuation type:
Operating tool || Push-in
approvals per:
UL 1059
color:
Blue
connectable conductor materials:
Copper
connection technology:
Push-in CAGE CLAMP
country of origin sales organisation germany:
CN
depth from upper edge of din rail:
32.5 mm / 1.28 inch
design:
Horizontal type
fine stranded conductor:
0.25 4 mm / 22 12 AWG
fine stranded conductor with ferrule push in termination:
1 2.5 mm / 18 14 AWG
fine stranded conductor with insulated ferrule:
0.25 2.5 mm / 22 14 AWG
fire load:
0.136 MJ
flammability class per ul94:
V0
height:
59.2 mm / 2.331 inch
insulation material:
Polyamide (PA66)
legend ratings:
(III / 3) Overvoltage category III / Pollution degree 3
marking level:
Center/side marking
mounting type:
DIN-35 rail
nominal cross section:
2.5 mm
nominal voltage iii 3:
690 V
note conductor cross section:
Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
number of connection points:
2
number of connection points 2:
1
packaging type:
Box
rated current:
20 A
rated current csa use group c:
20 A
rated current ul use group b:
20 A
rated current ul use group c:
20 A
rated surge voltage iii 3:
6 kV
rated voltage csa use group c:
600 V
rated voltage ul use group b:
600 V
rated voltage ul use group c:
600 V
ratings per:
IEC/EN 60947-7-1
solid conductor:
0.25 4 mm / 22 12 AWG
solid conductor push in termination:
0.75 4 mm / 18 12 AWG
strip length:
10 12 mm / 0.39 0.47 inch
weight:
6.303 g
width:
5.2 mm / 0.205 inch
wiring direction:
Front-entry wiring
$2.41

Description

2-conductor/1-pin carrier terminal block; 2.5 mm²; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm²; blue.

The WAGO 2022 X-COM S series carrier neutral-through terminal block is a blue, 1-deck/level component with side/lateral and center marking slots, designed for neutral-through pole (N) connections with three wires (two push-in and one plug-in pin). It supports a nominal cross-section of 2.5mm² and accommodates wire sizes from 0.25mm² to 4mm² or #22AWG to #12AWG. Rated for a current of 20A, it features Push-in CAGE CLAMP spring connections and plug-in pin connections, and is mounted on a DIN-35 rail (35 x 15 / 35 x 7.5) with a width of 5.2mm, equivalent to model 20221304.

View AllClose