Wago

WAGO 2022-2238

(No reviews yet) Write a Review
SKU:
2022-2238
MPN:
2022-2238
Condition:
New
actuation type:
Operating tool || Push-in
approvals per:
C22.2 No 158
color:
Gray
connectable conductor materials:
Copper
connection technology:
Push-in CAGE CLAMP«
country of origin sales organisation germany:
DE
depth from upper edge of din rail:
61.4 mm / 2.417 inch
design:
Horizontal type
fine stranded conductor:
0.25 ƒƒ‡ª 4 mm / 22 ƒƒ‡ª 12 AWG
fine stranded conductor with ferrule push in termination:
1 ƒƒ‡ª 2.5 mm / 18 ƒƒ‡ª 14 AWG
fine stranded conductor with insulated ferrule:
0.25 ƒƒ‡ª 2.5 mm / 22 ƒƒ‡ª 14 AWG
fire load:
0.263 MJ
flammability class per ul94:
V0
height:
80.1 mm / 3.154 inch
insulation material:
Polyamide (PA66)
legend ratings:
(III / 3) ƒƒ«ƒƒ– Overvoltage category III / Pollution degree 3
marking level:
Side marking
mounting type:
DIN-35 rail
nominal cross section:
2.5 mm
nominal voltage iii 3:
690 V
note conductor cross section:
Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
packaging type:
Box
rated current:
24 A
rated current 2:
28 A
rated current csa use group c:
20 A
rated current ul use group b:
20 A
rated current ul use group c:
20 A
rated surge voltage iii 3:
6 kV
rated voltage csa use group c:
600 V
rated voltage ul use group b:
600 V
rated voltage ul use group c:
600 V
ratings per:
IEC/EN 60947-7-1
solid conductor:
0.25 ƒƒ‡ª 4 mm / 22 ƒƒ‡ª 12 AWG
solid conductor push in termination:
0.75 ƒƒ‡ª 4 mm / 18 ƒƒ‡ª 12 AWG
strip length:
10 ƒƒ‡ª 12 mm / 0.39 ƒƒ‡ª 0.47 inch
weight:
12.542 g
width:
5.2 mm / 0.205 inch
wiring direction:
Front-entry wiring
  • Wago 2022-2238
  • Wago 2022-2238
$4.35

Description

2-conductor/2-pin, double-deck carrier terminal block; 2-conductor/2-pin through terminal block; 2.5 mm²; L; internal commoning; conductor entry with violet marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm²; gray.

The WAGO 2022 X-COM S series is a gray, double-deck terminal block with internal commoning and side marking slots, marked with "L". It features one feed-through pole (1P) and accommodates two push-in and two plug-in pin connections, supporting wire sizes from 0.25mm² to 4mm² (#22AWG to #12AWG) with a nominal cross-section of 2.5mm². The terminal block is rated for currents of 24A and 28A and utilizes Push-in CAGE CLAMP spring connections along with plug-in pin connections. It is designed for mounting on a DIN-35 rail (35 x 15 / 35 x 7.5) and has a width of 5.2mm, equivalent to model 20222238.

View AllClose