Three phase set with orange end plate with 2-Cond., Rail-Mount Term. Blocks.
The WAGO 2116 TOPJOB S series is a three-phase terminal block with a neutral and ground connection, featuring a single deck with a lever on one side and a built-in end plate. It includes side and center marking slots and is available in gray, blue, and green-yellow colors. The terminal block supports 3 feed-through poles, a neutral-through, and a protective-earth connection, accommodating 10 wires (5 push-in on each side) with a nominal cross-section of 16mm², suitable for wire sizes ranging from 0.5mm² to 25mm² (#20AWG to #4AWG). It utilizes Push-in CAGE CLAMP spring connections and is designed for DIN-35 rail mounting with a width of 61mm, equivalent to model number 21161201605038.
- actuation type:
- Push-in || Lever
- actuation type 2:
- Push-in || Operating tool
- color:
- Gray, blue, green-yellow
- connectable conductor materials:
- Copper
- connection technology:
- Push-in CAGE CLAMP
- country of origin sales organisation germany:
- PL
- depth from upper edge of din rail:
- 36.9 mm / 1.453 inch
- design:
- Horizontal type
- fine stranded conductor:
- 0.5 25 mm / 20 4 AWG
- fine stranded conductor with ferrule push in termination:
- 6 16 mm / 10 6 AWG
- fine stranded conductor with insulated ferrule:
- 0.5 16 mm / 20 6 AWG
- fire load:
- 2.037 MJ
- flammability class per ul94:
- V0
- height:
- 91.5 mm / 3.602 inch
- insulation material:
- Polyamide (PA66)
- marking level:
- Center/side marking
- mounting type:
- DIN-35 rail
- nominal cross section:
- 16 mm
- nominal voltage iii 3:
- 800 V
- note conductor cross section:
- Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
- packaging type:
- Box
- rated surge voltage iii 3:
- 8 kV
- ratings per:
- IEC/EN 60947-7-1
- safety information 1:
- 15 mm high DIN-35 rails shall be used for a current load higher than 76 A!
- solid conductor:
- 0.5 16 mm / 20 6 AWG
- solid conductor push in termination:
- 2.5 16 mm / 14 6 AWG
- strip length:
- 18 20 mm / 0.71 0.79 inch
- weight:
- 180.789 g
- width:
- 61 mm / 2.402 inch
- wiring direction:
- Front-entry wiring
