Wago

WAGO 2202-1601

(No reviews yet) Write a Review
SKU:
2202-1601
MPN:
2202-1601
Condition:
New
actuation type:
Push-in || Push-button || Operating tool
approvals per:
C22.2 No 158
color:
Gray
connectable conductor materials:
Copper
connection technology:
Push-in CAGE CLAMP
country of origin sales organisation germany:
DE
depth from upper edge of din rail:
32.9 mm / 1.295 inch
design:
Horizontal type
fine stranded conductor:
0.25 4 mm / 22 12 AWG
fine stranded conductor with ferrule push in termination:
1 2.5 mm / 18 14 AWG
fine stranded conductor with insulated ferrule:
0.25 2.5 mm / 22 14 AWG
fire load:
0.000 MJ
flammability class per ul94:
V0
height:
66.1 mm / 2.602 inch
insulation material:
Polyamide (PA66)
legend ratings:
(III / 3) Overvoltage category III / Pollution degree 3
marking level:
Center/side marking
mounting type:
DIN-35 rail
nominal cross section:
2.5 mm
nominal voltage iii 3:
400 V
note conductor cross section:
Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
packaging type:
Box
rated current:
16 A
rated current csa use group b:
15 A
rated current csa use group c:
15 A
rated current ul use group b:
15 A
rated current ul use group c:
15 A
rated surge voltage iii 3:
6 kV
rated voltage csa use group b:
300 V
rated voltage csa use group c:
300 V
rated voltage ul use group b:
300 V
rated voltage ul use group c:
300 V
ratings per:
IEC/EN 60947-7-1
solid conductor:
0.25 4 mm / 22 12 AWG
solid conductor push in termination:
0.75 4 mm / 18 12 AWG
strip length:
10 12 mm / 0.39 0.47 inch
weight:
7.830 g
width:
5.2 mm / 0.205 inch
wiring direction:
Front-entry wiring
  • Wago 2202-1601
  • Wago 2202-1601
  • Wago 2202-1601
$6.29

Description

2-conductor through terminal block; with push-button; 2.5 mm²; with test option; same profile as 2-conductor disconnect terminal block; side and center marking; for DIN-rail 35 x 15 and 35 x 7.5; Push-in CAGE CLAMP; 2,50 mm²; gray.

The WAGO 2202 TOPJOB S series is a gray feed-through terminal block with a single deck and features both side and center marking slots, a test point, and push-in CAGE CLAMP spring connections. It accommodates one feed-through pole for two wires (one push-in each) with a nominal cross-section of 2.5mm², suitable for wire sizes ranging from 0.25mm² to 4mm² or #22AWG to #12AWG. The terminal block is rated for a current of 16A and is designed for mounting on a DIN-35 rail (35 x 15 / 35 x 7.5) with a width of 5.2mm, equivalent to model 22021601.

View AllClose