Wago 221-2512 Mounting Carrier with Strain Relief, 2-Way, Gray, Pack of 5

Wago 221-2512 Mounting Carrier with Strain Relief, 2-Way, Gray The Wago 221-2512 is a 2-way mounting carrier with integrated strain relief, designed specifically for 221 Series inline splicing connectors with levers. It provides a secure mechanical mounting point plus cable retention to protect terminations from pull and vibration. The snap-in mounting foot enables fast installation into prepared panel cutouts, making it well suited for OEM, luminaire, and equipment wiring applications. The carrier is engineered for use with Wago 221 Series inline splicing connectors (Lever-Nuts), ensuring correct fit and alignment of the connector body. A dedicated strain relief feature allows cables to be secured with a tie wrap so that mechanical loads are transferred to the carrier rather than the conductor termination. The gray plastic body has a low installed profile, with a height from the mounting surface of approximately 6.5 mm, width of 20.8 mm, and overall depth of 100 mm, enabling use in narrow channels and shallow enclosures. The 2-way configuration accommodates one inline connector position in each direction, enabling orderly routing and support of through connections. Typical uses include mounting 221 inline connectors in luminaires, control panels, machine housings, and other assemblies where fixed positioning and strain relief of field wiring are required. Documentation - Technical Datasheet – Wago 221-2512 - `https://www.wago.com/221-2512` - Installation Instructions – Mounting Carrier with Strain Relief, 2-Way (221-2512) - `https://www.wago.com/us/download/221-2512-installation-instructions` - 3D/2D CAD Data – 221-2512 Mounting Carrier with Strain Relief - `https://www.wago.com/us/cad/221-2512` - Product Family Overview – Wago 221 Series Inline Mounting Carriers - `https://www.wago.com/us/wire-splicing-connectors/221-series-inline-mounting-carriers`