Wago 221-2513 Mounting Carrier with Strain Relief, 3-Way, Snap-In, Gray, Pack of 5

Wago 221-2513 Mounting Carrier with Strain Relief, 3-Way, Snap-In, Gray This 3-way mounting carrier is designed for secure mounting and strain relief of WAGO 221 Series inline splicing connectors with levers. The gray snap-in mounting foot allows rapid installation into properly dimensioned cutouts in metal or plastic panels, providing a fixed location for multiple inline connectors. With a low installed height and defined cable tie points, it is suited for space-constrained luminaires, control cabinets, and machinery where mechanical decoupling of the conductors from the splice is required. The 221-2513 accommodates three inline 221 Series lever connectors, aligning them in parallel while supporting the connector bodies against vibration and cable pull. An integrated strain relief feature enables the use of cable ties to secure incoming and outgoing conductors so that tensile loads are not transferred to the terminal clamps. The snap-in mounting foot is intended for insertion into pre-punched or molded slots, eliminating separate screws or DIN-rail hardware and reducing assembly time in OEM production. Physical characteristics include a width of 29.8 mm, height from mounting surface of 6.5 mm, and depth of 100 mm, with a lightweight thermoplastic construction. Typical applications include LED lighting gear trays, appliance and machinery wiring harness terminations, and panel assemblies using 221 Series inline connectors that must be positively located and mechanically protected. Documentation - Technical Datasheet – 221-2513 - `https://www.wago.com/global/wire-splicing-connectors/mounting-carrier/p/221-2513` - Installation Instructions – 221 Series Inline Mounting Carriers (including 221-2513) - `https://www.wago.com/global/installation-instructions/221-series-inline-mounting-carriers-221-2513` - 3D/2D CAD Data – 221-2513 Mounting Carrier - `https://www.wago.com/medias/221-2513-cad-data` - Product Family Overview – WAGO 221 Series Inline Accessories - `https://www.wago.com/global/wire-splicing-connectors/221-series-inline-accessories`