Wago 221-515/000-004 Mounting Carrier for 221 Series, 5-Conductor, Snap-In, Black, Pack of 10

The Wago 221-515/000-004 is a mounting carrier for 5-conductor Wago 221 Series splicing connectors (4 mm², 24–12 AWG), designed for horizontal mounting using a snap-in mounting foot. The carrier is made from PA66 (polyamide) with UL94 V0 flammability performance, and has a black housing. With compact dimensions of 52.8 × 35 × 21.4 mm (D × W × H) and a mounting height of 16.9 mm above the surface, it provides a low-profile, mechanically secure holder for panel or chassis-mounted wiring assemblies. Typical applications include OEM lighting, control panels, and machinery where fixed, repeatable positioning of 221 Series 5-conductor terminal blocks is required. The carrier is suitable for 5-wire connectors for 4 mm² conductors, covering the full 221 Series range for 24–12 AWG solid, stranded, and fine-stranded conductors. The PA66 insulation material with V0 flammability class supports use in control cabinets and industrial equipment where enhanced fire performance is needed. Low part mass (~4.95 g) and minimal fire load (0.000 MJ) support use in dense assemblies and energy-limited environments. The snap-in mounting foot is intended for horizontal mounting into prepared cut-outs or panels, providing a vibration-resistant mechanical interface without additional hardware. Dimensions and key mechanical data (typical): - Depth: 52.8 mm / 2.079 inch - Width: 35 mm / 1.378 inch - Height: 21.4 mm / 0.843 inch - Height from mounting surface: 16.9 mm / 0.665 inch - Material: Polyamide PA66, UL94 V0 - Color: Black - Approx. weight: 4.95 g Typical use-cases: - Mounting 5-conductor Wago 221 Series connectors in luminaires, appliance wiring, and machinery junction areas - Panel and enclosure wiring where connectors must be positively retained and oriented - Series production where standardized connector positioning and strain-relief routing are required Documentation - Technical Datasheet - `https://www.wago.com/us/wire-splicing-connectors/mounting-carrier/p/221-515_000-004` - Installation / Handling Instructions (221 Series Mounting Carriers) - `https://www.wago.com/us/installation-and-commissioning/221-series-mounting-carriers/221-515-000-004-instructions` - Product Family Overview – Wago 221 Series Accessories - `https://www.wago.com/us/wire-splicing-connectors/221-series-accessories/p/221-series-mounting-carriers` - CAD Data (2D/3D model, STEP/IGES) - `https://www.wago.com/us/wire-splicing-connectors/mounting-carrier/cad/221-515_000-004`