Description
2-conductor through terminal blockwith push-button 10 mm, blue
View AllClose
Electrical Data
- Rated voltage (III / 3): 800 V
- Rated impulse voltage (III / 3): 8 kV
- Rated current: 57 A
- Rated current (2): 76 A
- Legend (ratings): (III / 3) Overvoltage category III / Pollution degree 3
Connection Data
- Connection technology: Push-in CAGE CLAMP<sup></sup>
- Actuation type: Operating tool
- Connectable conductor materials: Copper
- Nominal cross section: 10 mm
- Solid conductor: 0.5 16 mm / 20 6 AWG
- Solid conductor, push-in termination: 2.5 16 mm / 14 6 AWG
- Fine-stranded conductor: 0.5 16 mm / 20 6 AWG
- Fine-stranded conductor with ferrule with plastic collar: 4 10 mm / 12 8 AWG
- Fine-stranded conductor with ferrule, push-in termination, from: 4 10 mm / 12 8 AWG
- Strip length: 17 19 mm / 0.67 0.75 inch
- Total number of connection points: 2
- Total number of potentials: 1
- Number of levels: 1
- Type of wiring: Front-entry wiring
- Note (conductor cross-section): Depending on the conductor characteristic, a conductor with a smaller cross section can also be inserted via push-in termination.
- Number of jumper slots: 2
Geometrical Data
- Width: 10 mm / 0.394 inch
- Height from upper-edge of DIN-35 rail: 36.9 mm / 1.453 inch
- Depth: 67.6 mm / 2.661 inch
Mechanical Data
- Design: horizontal
- Type of mounting: DIN-35 rail
- Marking level: Center/side marking
Material Data
- Color: blue
- Insulating material: Polyamide 66 (PA 66)
- Fire load: 0.000 MJ
- Weight: 18.975 g
Commercial data
- Packaging type: BOX
- Country of origin: DE
- GTIN: 4055143736077
- Customs Tariff No.: 85369010000
The WAGO 2210 TOPJOB S series neutral-through terminal block is a blue, single-deck component with side and center marking slots, suitable for Ex e II / Ex I applications. It features a test port and accommodates two wires (1 push-in + 1 push-in) with a nominal cross-section of 10mm², suitable for wire sizes ranging from 0.5mm² to 16mm² or #20AWG to #6AWG. The terminal block supports a rated current of 57A or 76A and utilizes Push-in CAGE CLAMP spring connections. It is designed for mounting on a DIN-35 rail (35 x 15 / 35 x 7.5) with a 10mm width, equivalent to model 22101204.