WAGO 2250-322 2-conductor miniature through tb with push-button 1 mm², orange
Wago
$1.52
(No reviews yet)
Write a Review
Write a Review
Wago
WAGO 2250-322 2-conductor miniature through tb with push-button 1 mm², orange
2-conductor miniature through terminal block; with push-button; 1 mm²; Center terminal block without snap-in mounting foot, without mounting flange; side and center marking; with test port; Push-in CAGE CLAMP; 1,00 mm²; orange.
The WAGO 2250 TOPJOB S series is an orange, feed-through miniature center terminal block designed for Ex e II applications. It features a single deck with side and center marking slots, a test port, and accommodates one feed-through pole with two push-in wire connections. It supports a nominal cross-section of 1mm² and is compatible with wire sizes ranging from 0.14mm² to 1.5mm² or #24AWG to #16AWG. The terminal block is rated for currents of 13.5A and 17.5A and utilizes Push-in CAGE CLAMP spring connections, equivalent to model 2250322.
- actuation type:
- Push-in || Push-button
- approvals per:
- CSA 22.2 No 158
- color:
- Orange
- connectable conductor materials:
- Copper
- connection technology:
- Push-in CAGE CLAMP®
- CONTINUOUS OPERATING TEMPERATURE:
- -60 ¢¦ +105 °C
- COUNTRY OF ORIGIN VKORG GERMANY:
- DE
- CUSTOMS TARIFF NUMBER VKORG GERMANY:
- 85369010000
- DEPTH:
- 33.2 mm / 1.307 inches
- FINE STRANDED CONDUCTOR:
- 0.14 ¢¦ 1.5 mm² / 24 ¢¦ 16 AWG
- FINE STRANDED CONDUCTOR WITH FERRULE PUSH IN TERMINATION:
- 0.5 ¢¦ 0.75 mm² / 20 ¢¦ 18 AWG
- FINE STRANDED CONDUCTOR WITH INSULATED FERRULE:
- 0.14 ¢¦ 0.75 mm² / 24 ¢¦ 18 AWG
- FIRE LOAD:
- 0.046 MJ
- FLAMMABILITY CLASS PER UL94:
- V0
- HEIGHT FROM THE SURFACE:
- 27.2 mm / 1.071 inches
- INSULATION MATERIAL:
- Polyamide (PA66)
- LEGEND RATINGS:
- (III / 3) ¢ Overvoltage category III / Pollution degree 3
- MARKING LEVEL:
- Center/side marking
- MATERIAL GROUP:
- I
- MEASUREMENT ERROR DEVIATION MAX FROM THE UPPER RANGE VALUE:
- MEASUREMENT ERROR DEVIATION MAX OF THE UPPER RANGE VALUE 2=
- MISMATING PROTECTION:
- MOUNTING NOTE=
- NOMINAL CROSS SECTION:
- 1 mm²
- NOMINAL VOLTAGE III 3:
- 500 V
- NOTE CONDUCTOR CROSS SECTION:
- Depending on the conductor characteristic, a conductor with a smaller cross-section can also be inserted via push-in termination.
- NOTE MATERIAL DATA:
- Information on material data can be found here
- PROCESSING TEMPERATURE:
- -35 ¢¦ +85 °C
- PRODUCT GROUP CODE:
- 38
- RATED CURRENT:
- 13.5 A
- RATED CURRENT 2:
- 17.5 A
- RATED CURRENT CSA USE GROUP B:
- 0.416666666666667
- RATED CURRENT CSA USE GROUP C:
- 0.416666666666667
- RATED CURRENT EX E II:
- 13.5 A
- RATED CURRENT EX E II WITH JUMPER:
- 0
- RATED CURRENT IN FOR SPECIFIED POWER LOSS:
- 13.5 A
- RATED CURRENT UL USE GROUP B:
- 0.416666666666667
- RATED CURRENT UL USE GROUP C:
- 0.416666666666667
- RATED IMPULSE VOLTAGE III 3:
- 6 kV
- RATED VOLTAGE CSA USE GROUP B:
- 300 V
- RATED VOLTAGE CSA USE GROUP C:
- 300 V
- RATED VOLTAGE EN EX E II:
- 352 V
- RATED VOLTAGE UL USE GROUP B:
- 300 V
- RATED VOLTAGE UL USE GROUP C:
- 300 V
- RATINGS PER:
- IEC/EN 60998-2-2
- REFERENCE HAZARDOUS AREAS:
- See Downloads ¢ Documentation ¢ Additional Information: Technical Section
- RESISTANCE VALUE FOR SPECIFIED CURRENT DEPENDENT POWER LOSS:
- 0.00238 ©
- SOLID CONDUCTOR:
- 0.14 ¢¦ 1.5 mm² / 24 ¢¦ 16 AWG
- SOLID CONDUCTOR PUSH IN TERMINATION:
- 0.5 ¢¦ 1.5 mm² / 20 ¢¦ 16 AWG
- STRIP LENGTH:
- 9 ¢¦ 11 mm / 0.35 ¢¦ 0.43 inches
- WEIGHT:
- 2.354 g
- WIDTH:
- 3.5 mm / 0.138 inches
- WIRING DIRECTION:
- Front-entry wiring
