WAGO 264-280 4-Conductor Terminal Block, SKU 264-280, Ex e II, Snap-In Mounting, 2.5 mm², CAGE CLAMP®, Light Gray

4-conductor Ex e II terminal block; with snap-in mounting foot; for plate thickness 0.6 - 1.2 mm; Fixing hole 3.5 mm also fits 210-154 aluminum rail or with 209-123 mounting carrier for DIN 35 rail; suitable for Ex e II applications

Electrical Data

• Rated voltage EN (Ex e II): 690 V
• Rated current (Ex e II): 23 A

Connection Data

• Connection technology: CAGE CLAMP
• Actuation type: Operating tool
• Connectable conductor materials: Copper
• Solid conductor: 0.08 2.5 mm / 28 12 AWG
• Fine-stranded conductor: 0.08 2.5 mm / 28 12 AWG
• Strip length: 8 9 mm / 0.31 0.35 inch
• Total number of connection points: 4
• Total number of potentials: 1
• Number of levels: 1
• Type of wiring: Front-entry wiring
• Note (conductor cross-section): 12 AWG: THHN, THWN

Geometrical Data

• Width: 10 mm / 0.394 inch
• Height from the surface: 22.1 mm / 0.87 inch
• Depth: 32 mm / 1.26 inch

Mechanical Data

• Design: horizontal
• Mounting type: Snap-in mounting foot
• Marking level: Center marking

Material Data

• Color: light gray
• Fire load: 0.116 MJ
• Weight: 6.500 g

Commercial data

• Packaging type: BOX
• Country of origin: CH
• GTIN: 4044918414555
• Customs Tariff No.: 85369010000

.

The WAGO 264 series feed-through terminal block is a light gray, single-deck unit with a snap-in mounting foot and center marking slot, suitable for Ex e II applications. It features one feed-through pole with four wire connections (two clamps on each side) and supports wire sizes from 0.08mm² to 2.5mm² (#28AWG to #12AWG). Rated for a current of 23A, it utilizes CAGE CLAMP spring connections and can be mounted on a DIN rail or surface using an accessory snap-in foot. The terminal block has a width of 10mm and is equivalent to model 264280.