WAGO 279-620/281-408 Component terminal block; 4-conductor; for lamp test circuits up to 60 V; with 2 diodes 1N4007; Right-side anode; for DIN-rail 35 x 15 and 35 x 7.5; 1.5 mm²; CAGE CLAMP; 1,50 mm²; gray

4-conductor diode terminal block; with 2 diodes 1N4007; for lamp test circuits up to 60 V

Electrical Data

• Nominal voltage: 60 V
• Reverse voltage: 1000 V
• Rated current: 0.5 A

Connection Data

• Connection technology: CAGE CLAMP
• Actuation type: Operating tool
• Connectable conductor materials: Copper
• Solid conductor: 0.08 1.5 mm / 28 16 AWG
• Fine-stranded conductor: 0.08 1.5 mm / 28 16 AWG
• Strip length: 8 9 mm / 0.31 0.35 inch
• Total number of connection points: 4
• Total number of potentials: 1
• Number of levels: 1
• Type of wiring: Front-entry wiring

Geometrical Data

• Width: 4 mm / 0.157 inch
• Height from upper-edge of DIN-35 rail: 27 mm / 1.063 inch
• Depth: 68 mm / 2.677 inch

Mechanical Data

• Design: horizontal
• Type of mounting: DIN-35 rail
• Marking level: Side marking

Material Data

• Color: gray
• Insulating material: Polyamide 66 (PA 66)
• Fire load: 0.135 MJ
• Weight: 6.100 g

Commercial data

• Packaging type: BOX
• Country of origin: DE
• GTIN: 4045454193843
• Customs Tariff No.: 85369010000

.

The WAGO 279 series component feed-through terminal block is a single-level terminal block designed for lamp test circuits up to 60V. It features two diodes (1N4007) with the anode on the right side, and includes side/lateral marking slots. The terminal block is gray, has two feed-through poles accommodating four wires (two clamps each), and supports wire sizes from 0.08mm² to 1.5mm² (#28AWG to #16AWG). It is rated for a current of 0.5A and utilizes CAGE CLAMP spring connections. The terminal block is designed for mounting on a DIN-35 rail (35 x 15 / 35 x 7.5) and has a width of 4mm, equivalent to model 279620281408.