Wago

WAGO 280-522

(No reviews yet) Write a Review
SKU:
280-522
MPN:
280-522
Condition:
New
actuation type:
Operating tool
connectable conductor materials note:
Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm/12 AWG if WAGO Alu-Plus Contact Paste is used for termination.Alu-Plus Contact Paste Advantages:Automatically
color:
Gray/gray
connectable conductor materials:
Copper || Aluminum
connection technology:
CAGE CLAMP
country of origin sales organisation germany:
DE
depth from upper edge of din rail:
81.5 mm / 3.209 inch
design:
Horizontal type
fine stranded conductor:
0.08 2.5 mm / 28 12 AWG
fire load:
0.190 MJ
flammability class per ul94:
V0
height:
74 mm / 2.913 inch
insulation material:
Polyamide (PA66)
legend ratings:
(III / 3) Overvoltage category III / Pollution degree 3
marking level:
Center marking
mounting type:
DIN-35 rail
nominal voltage iii 3:
400 V
note conductor cross section:
12 AWG: THHN, THWN
packaging type:
Box
rated current:
0.416666666666667
rated surge voltage iii 3:
6 kV
ratings per:
IEC/EN 60947-7-1
solid conductor:
0.08 2.5 mm / 28 12 AWG
strip length:
8 9 mm / 0.31 0.35 inch
weight:
10.867 g
width:
5 mm / 0.197 inch
wiring direction:
Front-entry wiring
$7.67

Description

Double-deck terminal block

  • Automatically destroys the oxide film during clamping.
  • Prevents fresh oxidation at the clamping point.
  • Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
  • Provides long-term protection against corrosion.
.

The WAGO 280 series is a gray, double-deck feed-through terminal block featuring an additional jumper position on the lower level and a center marking slot. It includes one disconnect feed-through and one feed-through pole, accommodating four wires with two clamps each, suitable for wire sizes ranging from 0.08mm² to 2.5mm² or #28AWG to #12AWG. Rated for a current of 10A, it utilizes CAGE CLAMP spring connections and is designed for mounting on a DIN-35 rail with dimensions of 35 x 15 or 35 x 7.5 mm, with a width of 5mm, equivalent to model 280522.

View AllClose