WAGO 280-542 Double-Deck Terminal Block, 2-Level, 2.5 mm², CAGE CLAMP®, Light Gray
WagoThe WAGO 280 series feed-through terminal block is a double-deck terminal block with an additional jumper position on the lower level and a center marking slot. It is light gray/gray in color and features two feed-through poles, accommodating four wires with two clamps on each level. It supports wire sizes from 0.08mm² to 2.5mm² or #28AWG to #12AWG and is rated for a current of 20A. The terminal block uses CAGE CLAMP spring connections and is designed for mounting on a DIN-35 rail (35 x 15 / 35 x 7.5) with a width of 5mm, equivalent to model 280542.
- actuation type:
- Operating tool
- connectable conductor materials note:
- Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm/12 AWG if WAGO Alu-Plus Contact Paste is used for termination.Alu-Plus Contact Paste Advantages:Automatically
- color:
- Light gray/gray
- connectable conductor materials:
- Copper || Aluminum
- connection technology:
- CAGE CLAMP
- country of origin sales organisation germany:
- DE
- depth from upper edge of din rail:
- 70.5 mm / 2.776 inch
- design:
- Horizontal type
- fine stranded conductor:
- 0.08 2.5 mm / 28 12 AWG
- fire load:
- 0.119 MJ
- flammability class per ul94:
- V0
- height:
- 64 mm / 2.52 inch
- insulation material:
- Polyamide (PA66)
- legend ratings:
- (III / 3) Overvoltage category III / Pollution degree 3
- marking level:
- Center marking
- mounting type:
- DIN-35 rail
- nominal voltage iii 3:
- 500 V
- note conductor cross section:
- 12 AWG: THHN, THWN
- packaging type:
- Box
- rated current:
- 20 A
- rated surge voltage iii 3:
- 6 kV
- ratings per:
- IEC/EN 60947-7-1
- solid conductor:
- 0.08 2.5 mm / 28 12 AWG
- strip length:
- 8 9 mm / 0.31 0.35 inch
- weight:
- 10.361 g
- width:
- 5 mm / 0.197 inch
- wiring direction:
- Front-entry wiring