Wago

WAGO 280-875

(No reviews yet) Write a Review
SKU:
280-875
MPN:
280-875
Condition:
New
actuation type:
Operating tool
connectable conductor materials note:
Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm/12 AWG if WAGO Alu-Plus Contact Paste is used for termination.Alu-Plus Contact Paste Advantages:Automatically
color:
Gray
connectable conductor materials:
Copper || Aluminum
connection technology:
CAGE CLAMP
country of origin sales organisation germany:
CN
depth from upper edge of din rail:
28.5 mm / 1.122 inch
design:
Horizontal type
fine stranded conductor:
0.08 2.5 mm / 28 12 AWG
fire load:
0.191 MJ
flammability class per ul94:
V0
height:
101 mm / 3.976 inch
insulation material:
Polyamide (PA66)
legend ratings:
(III / 3) Overvoltage category III / Pollution degree 3
marking level:
Center/side marking
mounting type:
DIN-35 rail
nominal voltage iii 3:
250 V
note conductor cross section:
12 AWG: THHN, THWN
packaging type:
Box
rated current:
16 A
rated surge voltage iii 3:
4 kV
solid conductor:
0.08 2.5 mm / 28 12 AWG
strip length:
8 9 mm / 0.31 0.35 inch
weight:
14.154 g
width:
5 mm / 0.197 inch
wiring direction:
Front-entry wiring
$10.88

Description

4-conductor disconnect/test terminal block; with shield contact; with test port; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP; 2,50 mm²; gray.

The WAGO 280 series feed-through disconnect/test terminal block is a gray, 1-deck unit featuring a knife-disconnect, shield contact, and both side and center marking slots. It includes a test port and supports 1 disconnect shield-through pole with 4-wire connections (2 clamps + 2 clamps) for wire sizes ranging from 0.08mm² to 2.5mm² or #28AWG to #12AWG. Rated for a current of 16A, it utilizes CAGE CLAMP spring connections and is designed for mounting on a DIN-35 rail (35 x 15 / 35 x 7.5) with a width of 5mm, equivalent to model 280875.

View AllClose