WAGO 280-889 Triple-Deck Terminal Block, 20A, 400V, 2.5mm², Cage Clamp, Gray
Wago
$11.84
Triple-deck terminal block; with additional jumper position on lower level; for DIN-rail 35 x 15 and 35 x 7.5; 2.5 mm²; CAGE CLAMP; 2,50 mm²; gray/gray/gray.
The WAGO 280 series feed-through terminal block is a triple-deck unit with pluggable disconnects and an additional jumper position on the lower level. It features three feed-through poles, each accommodating three clamps for two wires, suitable for wire sizes ranging from 0.08mm² to 2.5mm² or #28AWG to #12AWG. Rated for a current of 20A, it utilizes CAGE CLAMP spring connections and mounts on a DIN-35 rail (35 x 15 / 35 x 7.5) with a width of 5mm. This model is equivalent to the 280889.
- actuation type:
- Operating tool
- connectable conductor materials note:
- Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm/12 AWG if WAGO Alu-Plus Contact Paste is used for termination.Alu-Plus Contact Paste Advantages:Automatically
- color:
- Gray/gray/gray
- connectable conductor materials:
- Copper || Aluminum
- connection technology:
- CAGE CLAMP
- country of origin sales organisation germany:
- DE
- depth from upper edge of din rail:
- 49.5 mm / 1.949 inch
- design:
- Horizontal type
- fine stranded conductor:
- 0.08 2.5 mm / 28 12 AWG
- fire load:
- 0.273 MJ
- flammability class per ul94:
- V0
- height:
- 113 mm / 4.449 inch
- insulation material:
- Polyamide (PA66)
- legend ratings:
- (III / 3) Overvoltage category III / Pollution degree 3
- marking level:
- Without marking level
- mounting type:
- DIN-35 rail
- nominal voltage iii 3:
- 400 V
- note conductor cross section:
- 12 AWG: THHN, THWN
- packaging type:
- Box
- rated current:
- 20 A
- rated current 2:
- 20 A
- rated surge voltage iii 3:
- 6 kV
- ratings per:
- IEC/EN 60947-7-1
- solid conductor:
- 0.08 2.5 mm / 28 12 AWG
- strip length:
- 8 9 mm / 0.31 0.35 inch
- weight:
- 18.400 g
- width:
- 5 mm / 0.197 inch
- wiring direction:
- Front-entry wiring