Fuse disconnect terminal block with pivoting fuse holder; for 5 x 20 mm miniature metric fuse; 15 - 30 V; with blown fuse indication by LED.
The WAGO 281 series feed-through terminal block is a gray, single-deck unit featuring a fused-disconnect lever type for 5x20mm fuses, with a blown-fuse LED indicator for 15-30Vdc. It includes a center marking slot and supports one disconnect feed-through pole for two wires (one clamp each), accommodating wire sizes from 0.08mm² to 4mm² or #28AWG to #12AWG. Rated for a current of 10A, it utilizes CAGE CLAMP spring connections and mounts on a DIN-35 rail (35 x 15 / 35 x 7.5) with an 8mm width, equivalent to model numbers 281611281541.
- circuit type:
- 2-wire connection || Zero-voltage switching
- country of origin sales organisation germany:
- IT
- depth:
- 28 mm / 1.102 inch
- dielectric strength control load circuit ac 1 min:
- 3.75 kVrms
- fire load:
- 0.000 MJ
- height from the surface:
- 15 mm / 0.591 inch
- input voltage range high level:
- DC 20 28.8 V
- input voltage range low level:
- DC 0 10 V
- leakage current at rated voltage:
- ¤ 1.5 mA
- limiting continuous current:
- 0.0833333333333333
- mounting type:
- Pluggable module
- nominal input current at un:
- 7 mA
- nominal input voltage un:
- DC 24 V
- nominal output voltage:
- AC 230 V
- note:
- Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks.
- operating altitude max:
- 2000 m
- output voltage range:
- AC 24 240 V
- packaging type:
- Box
- relative humidity:
- 5 95 % (no condensation permissible)
- surrounding air temperature operation at un:
- -30 80 C
- surrounding air temperature storage:
- -40 100 C
- switching current min:
- 22 mA
- switching frequency:
- 50 Hz / 60 Hz
- turn off time:
- ¤ 10 ms
- turn on time:
- ¤ 10 ms
- voltage drop at output max:
- ¤ AC 1.6 V
- weight:
- 3.500 g
- width:
- 5 mm / 0.197 inch
