Wago

WAGO 281-613/281-418

(No reviews yet) Write a Review
SKU:
281-613/281-418
MPN:
281-613/281-418
Condition:
New
actuation type:
Operating tool
connectable conductor materials note:
Terminating Aluminum ConductorsWAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm/12 AWG if WAGO Alu-Plus Contact Paste is used for termination.Alu-Plus Contact Paste Advantages:Automatically
type of fuse:
Cylindrical fuse 1/4" x 1"
color:
Gray
connectable conductor materials:
Copper || Aluminum
connection technology:
CAGE CLAMP
country of origin sales organisation germany:
DE
depth from upper edge of din rail:
60 mm / 2.362 inch
design:
Angled
fine stranded conductor:
0.08 4 mm / 28 12 AWG
fire load:
0.033 MJ
flammability class per ul94:
V0
height:
60 mm / 2.362 inch
insulation material:
Polyamide (PA66)
legend ratings:
(III / 3) Overvoltage category III / Pollution degree 3
marking level:
Center marking
mounting type:
DIN-35 rail
nominal voltage iii 3:
800 V
note on rated current 1:
Leakage current in case of a blown fuse: Neon lamp < 0.4 mA
operation status indicator:
120 V
packaging type:
Box
rated current:
0.416666666666667
rated surge voltage iii 3:
8 kV
ratings note:
Electrical ratings are given by the fuse and blown fuse indication.
ratings per:
IEC/EN 60947-7-3
solid conductor:
0.08 4 mm / 28 12 AWG
strip length:
9 10 mm / 0.35 0.39 inch
weight:
19.908 g
width:
10 mm / 0.394 inch
wiring direction:
Front-entry wiring
  • Wago 281-613/281-418
  • Wago 281-613/281-418
  • Wago 281-613/281-418
$19.69

Description

2-conductor fuse terminal block; with pivoting fuse holder; for miniature metric fuse 1/4 x 1 mm; with blown fuse indication by neon lamp; 120 V; for DIN-rail 35 x 15 and 35 x 7.5; 4 mm²; CAGE CLAMP; 4,00 mm²; gray.

The WAGO 281 series is a gray, single-deck feed-through terminal block featuring a fused-disconnect lever type (1/4x1") with a 120Vdc blown-fuse neon indicator and a center marking slot. It has one disconnect feed-through pole (1P) and accommodates two wires (1 clamp + 1 clamp) for wire sizes ranging from 0.08mm² to 4mm² or #28AWG to #12AWG. The terminal block is rated for a current of 10A and utilizes CAGE CLAMP spring connections. It is designed for mounting on a DIN-35 rail (35 x 15 / 35 x 7.5) with a width of 10mm, equivalent to model numbers 281613281418.

View AllClose