Interface Modulewith male connector per DIN 41651 34-pole
Electrical Data
- Operating voltage: nbsp;AC 30 V; nbsp;DC 50 V
- Nominal current: 1 A
Safety and protection:
- Rated voltage: 50 V
- Rated impulse voltage: 0.8 kV
- Pollution degree: 2
- Protection class: IP00*
- Note on protection class: <b>Notice!</b>Live conductors! Protection against direct contact must be provided by the equipment builder, e.g., using a WAGO 709 Series cover (see Accessories) or a similar cover. The installation requirements for the particular application must be observed.
Connection Data
- Connection type (1): System
- No. of poles: 34
- Pluggable connector: Pluggable connector per DIN 41651; male connector
- Mating direction: Vertical
- Connection type (2): Field
- No. of poles 2: 34
- Design 2: PCB terminal blocks, 2-row
- Connection technology 2: CAGE CLAMP<sup></sup>
- WAGO terminal 2: WAGO 236 Series
- Solid conductor (2): 0.08 2.5 mm / 28 12 AWG
- Fine-stranded conductor (2): 0.08 2.5 mm / 28 12 AWG
- Strip length (2): 5 6 mm / 0.2 0.24 inch
- Note (conductor cross-section): 12 AWG: THHN, THWN
- Performance level: 3 / 50 mating cycles
Geometrical Data
- Width: 102 mm / 4.016 inch
- Height from upper-edge of DIN-35 rail: 28 mm / 1.102 inch
- Depth: 63.5 mm / 2.5 inch
Mechanical Data
- Type of mounting: DIN-35 rail
- Housing design: PCB with mounting feet
Material Data
- Contact material (pluggable connector): Au over Ni
- Fire load: 0.000 MJ
- Weight: 61.800 g
Environmental Requirements
- Surrounding air (operating) temperature: -20 55 C
- Surrounding air (storage) temperature: -40 70 C
- Relative humidity: nbsp;85% (non condensing)
Commercial data
- Packaging type: BOX
- Country of origin: DE
- GTIN: 4045454353414
- Customs Tariff No.: 85369010000
The WAGO 289 series interface module is a stand-alone PCB with mounting feet, featuring a 34-pole configuration and a DIN 41651 34-pin male connector for system connections. It includes a 2-row spring CAGE CLAMP for 34-pin field connections, accommodating cables from 0.08 to 2.5mm². The module supports a rated current of 1A and is designed for DIN-35 rail mounting with a width of 102mm. It operates within an ambient temperature range of -20°C to +55°C and is equivalent to model 289406.
- connection technology 2:
- CAGE CLAMP
- connection type 1:
- System
- connection type 2:
- Field
- contact material connector:
- Au over Ni
- country of origin sales organisation germany:
- DE
- depth from upper edge of din rail:
- 28 mm / 1.102 inch
- design 2:
- PCB terminal blocks (double-row)
- fine stranded conductor 2:
- 0.08 2.5 mm / 28 12 AWG
- fire load:
- 0.054 MJ
- height:
- 63.5 mm / 2.5 inch
- housing design:
- PCB with mounting feet
- mating direction:
- Vertical
- mounting type:
- DIN-35 rail
- nominal current:
- 0.0416666666666667
- note conductor cross section:
- 12 AWG: THHN, THWN
- note on protection type:
- Notice! Live parts can be easily touched! Protection against direct contact must be provided by the equipment manufacturer, e.g., using a WAGO 709 Series Cover (see Accessories) or a similar cover. The installation guidelines must be observ
- operating voltage:
- ¤30 VAC: ¤50 VDC
- packaging type:
- Box
- performance level:
- 3 / 50 mating cycles
- pluggable connectors:
- DIN 41651 male connector
- pole no:
- 34
- pole number 2:
- 34
- pollution degree:
- 2
- protection type:
- IP00*
- rated surge voltage:
- 0.8 kV
- rated voltage:
- 50 V
- relative humidity:
- ¤ 85% (non-condensing)
- solid conductor 2:
- 0.08 2.5 mm / 28 12 AWG
- strip length 2:
- 5 6 mm / 0.2 0.24 inch
- surrounding air temperature operation:
- -20 55 C
- surrounding air temperature storage:
- -40 70 C
- wago connector 2:
- WAGO 236 Series
- weight:
- 61.800 g
- width:
- 102 mm / 4.016 inch
