Interface module; Pluggable connector per DIN 41651; 64-pole; PCB terminal blocks, triple-row; in mounting carrier; 2,50 mm².
The WAGO 289 series interface module features a 64-pole configuration with a DIN 41651 64-pin male connector for system connections and a 3-row spring CAGE CLAMP for field connections, accommodating cables from 0.08 to 2.5mm². It supports a rated current of 1A and is designed for DIN-35 rail mounting with a width of 120mm. The module operates within an ambient temperature range of -20°C to +55°C and is equivalent to model 289510.
- connection technology 2:
- CAGE CLAMP
- connection type 1:
- System
- connection type 2:
- Field
- contact material connector:
- Au over Ni
- country of origin sales organisation germany:
- DE
- depth from upper edge of din rail:
- 36 mm / 1.417 inch
- design 2:
- PCB terminal blocks (triple-row)
- fine stranded conductor 2:
- 0.08 2.5 mm / 28 12 AWG
- fire load:
- 1.310 MJ
- height:
- 85 mm / 3.346 inch
- housing design:
- Mounting carrier
- mating direction:
- Vertical
- mounting type:
- DIN-35 rail
- nominal current:
- 0.0416666666666667
- note conductor cross section:
- 12 AWG: THHN, THWN
- operating voltage:
- ¤100 VAC: ¤125 VDC
- packaging type:
- Box
- performance level:
- 3 / 50 mating cycles
- pluggable connectors:
- DIN 41651 male connector
- pole no:
- 64
- pole number 2:
- 64
- pollution degree:
- 2
- protection type:
- IP20
- rated surge voltage:
- 0.8 kV
- rated voltage:
- 100 V
- relative humidity:
- ¤ 85% (non-condensing)
- solid conductor 2:
- 0.08 2.5 mm / 28 12 AWG
- strip length 2:
- 5 6 mm / 0.2 0.24 inch
- surrounding air temperature operation:
- -20 55 C
- surrounding air temperature storage:
- -40 70 C
- wago connector 2:
- WAGO 236 Series
- weight:
- 147.868 g
- width:
- 120 mm / 4.724 inch
