Wago

WAGO 750-337/025-000

(No reviews yet) Write a Review
SKU:
51207039
MPN:
750-337/025-000
Condition:
New
baud rate:
10 kBd 1 MBd
bus segment length max:
1000 m
cob id distribution:
SDO, standard
communication:
CANopen
communication profile:
DS-301 V4.1
conformity marking:
CE
connection technology communication fieldbus:
CANopen: 1 x Male connector: 5-pole
connection technology device configuration:
1 x Male connector: 4-pole
connection technology field supply:
6 x CAGE CLAMP
connection technology system supply:
2 x CAGE CLAMP
connection type 1:
System/field supply
country of origin sales organisation germany:
DE
current carrying capacity power jumper contacts:
0.416666666666667
depth:
71.1 mm / 2.799 inch
depth from upper edge of din rail:
63.9 mm / 2.516 inch
device profile:
DS-401 V2.0 || Limit value monitoring || Edge-triggered PDOs || Configurable response in the event of an error
emc emission of interference:
Per EN 61000-6-4, marine applications
emc immunity to interference:
Per EN 61000-6-2, marine applications
exposure to pollutants:
Per IEC 60068-2-42 and IEC 60068-2-43
fine stranded conductor:
0.08 2.5 mm / 28 14 AWG
fire load:
2.637 MJ
height:
100 mm / 3.937 inch
housing material:
Polycarbonate: polyamide 6.6
input and output fieldbus process image max:
512 Byte/512 Byte
input current typ at nominal load 24 v:
500 mA
isolation:
500 V system/field
mounting position:
Horizontal (standing/lying): vertical
mounting type:
DIN-35 rail
node id distribution:
DIP switch
note:
Note: Configuration files required (EDS)!
number of fieldbus nodes on master max:
110
number of modules per node max:
64
number of outgoing power jumper contacts:
3
number of pdos:
32 Tx / 32 Rx
number of sdos:
2 SDO servers
operating altitude:
0 2000 m
other canopen features:
NMT slave || Minimum boot-up || Variable PDO mapping || Emergency message || Life guarding || Empty module configuration
packaging type:
Box
permissible h2s contaminant concentration at a relative humidity 75:
10 ppm
permissible so2 contaminant concentration at a relative humidity 75:
25 ppm
pollution degree 5:
2 per IEC 61131-2
power consumption 5 v system supply:
350 mA
power supply efficiency typ at nominal load 24 v:
0.87
protection type:
IP20
relative humidity with condensation:
Short-term condensation per Class 3K6/IEC EN 60721-3-3 and E-DIN 40046-721-3, accounting for a temperature range of 20 to +60 C (except for wind-driven precipitation, water and ice formation)
relative humidity without condensation:
0.95
shock resistance:
15g per IEC 60068-2-27
solid conductor:
0.08 2.5 mm / 28 14 AWG
strip length:
8 9 mm / 0.31 0.35 inch
supply voltage field:
24 VDC (-25 +30 %): via power jumper contacts
supply voltage system:
24 VDC (-25 +30 %): via pluggable connector (CAGE CLAMP connection)
surrounding air temperature operation:
-20 60 C
surrounding air temperature storage:
-40 85 C
total current system supply:
1650 mA
transmission medium:
Shielded Cu cable 3 x 0.25 mm
vibration resistance:
4g per IEC 60068-2-6
weight:
185.000 g
width:
50.5 mm / 1.988 inch
  • Wago 750-337/025-000
  • Wago 750-337/025-000
  • Wago 750-337/025-000
$631.00

Description

Fieldbus Coupler CANopen; MCS; Ext. Temperature.

The WAGO 750 series Fieldbus coupler/head (remote I/O controller unit) is designed for extended temperature ranges and features CANopen communication capability. It supports up to 64 connections per node and 110 fieldbus nodes on the master connection. The unit operates on a 24Vdc supply via system wiring and a power jumper for the field, and includes a 5-pin male MCS connector for fieldbus, a spring CAGE CLAMP for power supply connections, and a 4-pin male connector for device configuration. It is mounted on a DIN-35 rail with a width of 50.5mm, has an IP20 protection rating, and is suitable for ambient temperatures ranging from -20°C to +60°C. The unit is equivalent to model 750337025000.

View AllClose