Short circuit, active acknowledgment after error rectified
emc emission of interference:
Per EN 61000-6-4, marine applications
emc immunity to interference:
Per EN 61000-6-2, marine applications
exposure to pollutants:
Per IEC 60068-2-42 and IEC 60068-2-43
fine stranded conductor:
0.08 2.5 mm / 28 14 AWG
fire load:
0.931 MJ
height:
100 mm / 3.937 inch
housing material:
Polycarbonate: polyamide 6.6
indicators:
LED (A, C) green: Status DI 1, DI 2: LED (B, D) red: Error DI 1, DI 2
input characteristic:
High-side switching
input current per channel for signal 1 typ:
3.7 mA
input data width internal max:
4 bits
input filter digital:
3 ms
isolation:
500 V system/field
mounting position:
Horizontal (standing/lying): vertical
mounting type:
DIN-35 rail
number of digital inputs:
2
number of incoming power jumper contacts:
2
number of outgoing power jumper contacts:
2
operating altitude:
0 2000 m
output current per channel:
0.5 A
output internal data width max:
4 bits
packaging type:
Box
permissible h2s contaminant concentration at a relative humidity 75:
10 ppm
permissible so2 contaminant concentration at a relative humidity 75:
25 ppm
pollution degree 5:
2 per IEC 61131-2
power consumption 5 v system supply:
12 mA
protection type:
IP20
relative humidity without condensation:
0.95
sensor connection:
2 x (2-wire, 3-wire)
shock resistance:
15g per IEC 60068-2-27
short circuit current:
1.5 A, pulsating due to thermal overload protection
signal type:
Voltage
solid conductor:
0.08 2.5 mm / 28 14 AWG
strip length:
8 9 mm / 0.31 0.35 inch
supply voltage field:
24 VDC (-25 +30 %): via power jumper contacts (power supply via blade contact: transmission via spring contact)
supply voltage sensor:
24 VDC: Short-circuit-protected, isolated channels A short circuit to ground is indicated as an error/fieldbus failure and a message is sent to the supervisory control. The error is canceled via the controller after it has been rectified (active ackn
