Derating (supply voltage): Surrounding air temperatures under laboratory conditions: (-25 +30 %): for -40 +55 C: 24 V (-25 +20 %): for +55 +70 C: 24 V (-25 +10 %): Lower limit in all temperature ranges: 27.5 % (
emc emission of interference:
Per EN 61000-6-3, -4, EN 61131-2, EN 60255-26, marine applications, EN 60870-2-1, EN 61850-3
emc immunity to interference:
Per EN 61000-6-1, -2, EN 61131-2, marine applications, EN 60255-26, EN 60870-2-1, EN 61850-3, IEC 61000-6-5, IEEE 1613, VDEW: 1994
ex guideline:
EN/IEC 60079-0, -7, -11
exposure to pollutants:
Per IEC 60068-2-42 and IEC 60068-2-43
fine stranded conductor:
0.25 1.5 mm / 24 14 AWG
fire load:
0.513 MJ
fuse:
Electronic
height:
100 mm / 3.937 inch
housing material:
Polycarbonate: polyamide 6.6
intrinsic safety ex i:
Yes
marking:
ATEX/IECEx: II 3G Ex ec IIC T4 Gc
mounting position:
Horizontal (standing/lying): vertical
mounting type:
DIN-35 rail
note:
General information (e.g., installation regulations) on explosion protection is available in the WAGO I/O System 750 XTR manuals!
number of outgoing power jumper contacts:
2
operating altitude:
Without temperature derating: 0 2000 m: with temperature derating: 2000 5000 m (0.5 K/100 m): 5000 m (max.)
packaging type:
Box
permissible h2s contaminant concentration at a relative humidity 75:
10 ppm
permissible so2 contaminant concentration at a relative humidity 75:
25 ppm
pollution degree 5:
2 per IEC 61131-2
power consumption 5 v system supply:
7.5 mA
power consumption pmax:
29 W
power loss pl:
< 5 W
power supply input:
Un = 24 VDC: Pmax. = 29 W: Um = 253 V
power supply output:
Uo = 26.8 V (intrinsically safe output voltage per protection level ia): In = 1 A
protection type:
IP20
rated surge voltage:
1 kV: Rated surge voltage between intrinsically safe and non-intrinsically safe circuits: 1.5 kV (EN 60079-11)
relative humidity with condensation:
Short-term condensation per Class 3K7/IEC EN 60721-3-3 and E-DIN 40046-721-3 (except for wind-driven precipitation, water and ice formation)
relative humidity without condensation:
0.95
shock resistance:
Per IEC 60068-2-27 (15g/11 ms/half-sine/1,000 shocks: 25g/6 ms/1,000 shocks), EN 61373
solid conductor:
0.25 1.5 mm / 24 14 AWG
strip length:
5 6 mm / 0.2 0.24 inch
supply voltage field:
24 VDC (-25 +30 %): via power jumper contacts (power supply via CAGE CLAMP connection: transmission via spring contact): Derating must be observed!
supply voltage system:
5 VDC: via data contacts
surrounding air temperature operation:
-40 70 C
surrounding air temperature storage:
-40 85 C
vibration resistance:
Per IEC 60068-2-6 (acceleration: 5g), EN 60870-2-2, IEC 60721-3-1, -3
