WAGO 758-919

The Wireless Access Point enables wireless access to a machine or system. This wireless transmission can be performed via WLAN (IEEE802.11a/b/g/d/n/r), Bluetooth® or Bluetooth® Low Energy in different operating modes. For example, a tablet or smartphone can be used to access the control system of a machine via a radio connection. The device can also be configured to integrate a machine or system into an existing wireless network (e.g., WLAN network) as a client. In the third main operating mode, a wireless transmission link for ETHERNET protocols (e.g., PROFINET, Modbus/TCP, EtherNet/IPTM) can be established between two devices. In this gateway mode, the device is used as a cable substitute to create a robust, industry-proven Bluetooth® or WLAN link between two automation devices.
The Wireless Access Point is designed for through-panel mounting (cut-out = 50.5 mm) in the control cabinet. The Wireless Access Point is inserted through the panel cut-out and screwed from the opposite side via M50 nut. Wiring is performed inside the control cabinet. The external side of the housing meets the IP67 protection class.

Note: The Wireless Access Point is compatible with the Wireless ETHERNET Gateway. These devices can be used jointly in a network.
Note: The maximum range in the field decreases within buildings and varies depending on building materials and spatial geometry. Therefore, range specifications within buildings can only represent a typical value that can normally be achieved. More detailed information is available in the manual.

The WAGO 758 series wireless access point supports Bluetooth 2.1/4.0 (Low Energy) and WLAN IEEE 802.11a/b/g/n/d/r (2.4GHz/5GHz) standards. It operates with a supply voltage of 19-36Vdc and features one RJ45 connector for fieldbus and one 3-pole female connector for power supply. The device is rated IP67 for protection against dust and water and can function in ambient temperatures ranging from -40°C to +65°C. It is equivalent to model 758919.