Description
1-conductor/1-pin terminal block for pluggable modules; with 2 jumper positions; with orange separator plate; 11.1 mm wide; 4-pole
View AllClose
Electrical Data
- Rated voltage (III / 3): 400 V
- Rated impulse voltage (III / 3): 6 kV
- Rated current: 16 A
- Legend (ratings): (III / 3) Overvoltage category III / Pollution degree 3
Connection Data
- Connection technology: CAGE CLAMP<sup></sup>
- Actuation type: Operating tool
- Connectable conductor materials: Copper
- Nominal cross section: 4 mm
- Solid conductor: 0.08 4 mm / 28 12 AWG
- Fine-stranded conductor: 0.08 4 mm / 28 12 AWG
- Strip length: 8 9 mm / 0.31 0.35 inch
- No. of poles: 4
- Total number of connection points: 2
- Total number of potentials: 4
- Number of levels: 1
- Type of wiring: Front-entry wiring
Geometrical Data
- Width: 11.1 mm / 0.437 inch
- Height from upper-edge of DIN-35 rail: 28.5 mm / 1.122 inch
- Depth: 87.5 mm / 3.445 inch
Mechanical Data
- Design: horizontal
- Type of mounting: DIN-35 rail
- Marking level: Center marking
Material Data
- Color: gray
- Insulating material: Polyamide 66 (PA 66)
- Fire load: 0.404 MJ
- Weight: 18.866 g
Commercial data
- Packaging type: BOX
- Country of origin: DE
- GTIN: 4044918934848
- Customs Tariff No.: 85369010000
The WAGO 769 X-COM series feed-through terminal block is a gray, 1-deck unit featuring a pluggable disconnect, two jumper positions, and a built-in orange separator. It accommodates four feed-through poles and eight wires (four clamps and four plug-in pins) with a nominal cross-section of 4mm², suitable for wire sizes ranging from 0.08mm² to 4mm² or #28AWG to #12AWG. Rated for a current of 16A, it utilizes CAGE CLAMP spring connections and plug-in pin connections, and is designed for mounting on a DIN-35 rail (35 x 15 / 35 x 7.5) with an 11.1mm width, equivalent to model 769182769314.
