Description
1-conductor/1-pin disconnect carrier terminal block; with shield contact; with 2 jumper positions
View AllClose
Electrical Data
- Rated voltage (III / 3): 250 V
- Rated impulse voltage (III / 3): 4 kV
- Rated current: 16 A
- Legend (ratings): (III / 3) Overvoltage category III / Pollution degree 3
Connection Data
- Connection technology: CAGE CLAMP<sup></sup>
- Actuation type: Operating tool
- Connectable conductor materials: Copper
- Nominal cross section: 4 mm
- Solid conductor: 0.08 4 mm / 28 12 AWG
- Fine-stranded conductor: 0.08 4 mm / 28 12 AWG
- Strip length: 8 9 mm / 0.31 0.35 inch
- Total number of connection points: 1
- Total number of potentials: 1
- Number of levels: 1
- Type of wiring: Front-entry wiring
Geometrical Data
- Width: 5 mm / 0.197 inch
- Height from upper-edge of DIN-35 rail: 28.5 mm / 1.122 inch
- Depth: 101 mm / 3.976 inch
Mechanical Data
- Design: horizontal
- Type of mounting: DIN-35 rail
- Marking level: Center marking
Material Data
- Color: gray
- Insulating material: Polyamide 66 (PA 66)
- Fire load: 0.181 MJ
- Weight: 11.900 g
Commercial data
- Packaging type: BOX
- Country of origin: DE
- GTIN: 4044918934787
- Customs Tariff No.: 85365080900
The WAGO 769 X-COM series carrier feed-through terminal block is a gray, 1-deck unit featuring a tab disconnect, two jumper positions, a shield contact, and a center marking slot. It supports a nominal cross-section of 4mm² and accommodates wire sizes from 0.08mm² to 4mm² (#28AWG to #12AWG). The terminal block has a rated current of 16A and utilizes CAGE CLAMP spring connections along with plug-in pin connections. It is designed for mounting on a DIN-35 rail (35 x 15 / 35 x 7.5) and has a width of 5mm, equivalent to model 769213.
