Wago

WAGO 787-1007

(No reviews yet) Write a Review
SKU:
787-1007
MPN:
787-1007
Condition:
New
conformity marking:
CE
connection technology:
CAGE CLAMP
connection type 1:
Input/output
control deviation:
¤ 2 %
country of origin sales organisation germany:
DE
current limitation:
1.1 x Io nom (typ.)
default setting:
DC 18 V
depth:
59 mm / 2.323 inch
depth from upper edge of din rail:
55 mm / 2.165 inch
efficiency typ:
0.8
fine stranded conductor:
0.08 2.5 mm / 28 12 AWG
fire load:
0.000 MJ
flammability class per ul94:
V0
height:
89 mm / 3.504 inch
input current ii:
¤ 0.4 A (230 VAC): ¤ 0.6 A (110 VAC)
input voltage range:
AC 85 264 V: DC 120 373 V
inrush current:
¤ 30 A (NTC)
internal fuse:
T 2 A / 250 VAC
isolation voltage pri sec:
DC 4.242 kV
mains failure hold up time:
80 ms (230 VAC): 10 ms (110 VAC)
mounting type:
DIN-35 rail
mtbf:
> 500,000 h (per IEC 61709)
nominal input voltage ui nom:
1 x AC 100 240 V
nominal mains frequency range:
44 66 Hz: 0 Hz
nominal output current io nom:
1.1 A (18 VDC): 0.8 A (18 VDC: in any mounting position)
nominal output power:
19.8 W
nominal output voltage uo nom:
DC 18 V (SELV)
open circuit proof:
Yes
operation status indicator:
Green LED (Uo)
overload behavior:
Constant current
overvoltage category:
II
packaging type:
Box
phases:
1
pollution degree:
2
power loss pl:
¤ 3 W (No load): ¤ 6 W (Nominal load)
protection class:
II
protection type:
IP20 per EN 60529
recommended backup fusing:
Circuit breaker: 6 A (C characteristic), 10 A (B characteristic) or higher
relative humidity:
5 96 % (no condensation permissible)
required backup fusing:
An external DC fuse is required for the DC input voltage.
residual ripple:
¤ 100 mV (Peak-to-peak)
resistance to reverse feed:
¤ DC 20 V
short circuit protected:
Yes
signaling:
1 x Status indication LED (green)
solid conductor:
0.08 2.5 mm / 28 12 AWG
standards specifications:
EN 61010-1 || EN 61010-2-201 || EN 61204-3 || UL 60950 || UL 508 || DNV GL
strip length:
6 7 mm / 0.24 0.28 inch
surrounding air temperature operation:
-25 60 C
surrounding air temperature storage:
-25 80 C
wago connector:
WAGO 740 Series
weight:
170.000 g
width:
54 mm / 2.126 inch
  • Wago 787-1007
  • Wago 787-1007
  • Wago 787-1007
$179.60

Description

Description Primary switch mode power supplies; for 753-647 DALI Multi-Master Module; DC 18 V / 1.1 A 
Remarks Note:

The 787-1007 Primary Switch Mode Power Supply is specially designed to supply the 753-647 DALI Multi-Master Module. The 787-1007 features a 54mm-wide DIN-rail mount enclosure with input voltage ranging from 85 to 264VAC (120 373VAC). The power supply provides an output voltage of 18VDC and a maximum output current of 1100mA. This allows several DALI Multi-Master Modules to be supplied in parallel. The maximum current per DALI line is limited to 200mA in each DALI Multi-Master Module.

  • Supplies up to five 753-647 DALI Multi-Master Modules*
  • Prepared for class II equipment
  • Natural convection cooling when horizontally mounted
  • Stage profile, ideal for distribution boards or distribution boxes



Output current Io: 1.1 A at 18 VDC max. 0.8 A (18 VDC) in any mounting position

External fuse: Wire breaking 10 A, 16 A, Characteristic B, CAn external DC fuse is required for the DC input voltage

 
 
Item properties

Miscellaneous

Name Value Unit
Power loss PV  3 W (no load) / 6 W (rated load)   
Protection class  Prepared for class II equipment   
Factory preset  18 VDC   
Connection technology 1  WAGO 740 Series   
Overload behavior  Constant current   
Degree of pollution (5)  2 (acc. to EN 50178)   
MTBF  500000 h   
Input voltage range  85 ... 264 VAC; 120 ... 373 VDC   
Nominal input voltage Vi nom  100 ... 240 VAC   
Input current Ii  0.6 A at 110 VAC / 0.4 A at 230 VAC   
Mains failure hold-up time  > 10 ms at 110 VAC / > 80 ms at 230 VAC   
Internal fuse  T 2 A / 250 V   
Nominal output voltage Vo nom  18 VDC   
Residual ripple  < 100 mV (peak-to-peak)   
Adjustment accuracy [%]  < 1 
Current limitation  1.1 x Io typ.   
Feedback voltage  max. 20 VDC   
Efficiency  80 % typ.   
Test voltage PRI SEC [kV]  4.2 kV DC  kV 
Degree of protection  IP20 per EN 60529   
Operational indication  Green LED (Uo  
Short circuit protection  yes   
No-load proof  yes   
Strip length  6 7 mm / 0.24 0.28 Inch   
Strip length 2  6 7 mm / 0.24 0.28 Inch   
Weight [g]  170 
Width  54 mm / 2.126 Inch   
Height from upper-edge of DIN-35 rail  89 mm / 3.504 Inch   
Depth  59 mm / 2.323 Inch   
Enclosure  Plastic, light gray, Flammability class V0 acc. to UL94   
Type of mounting  DIN-35 x 15 carrier rail   
Ambient operating temperature  -25 ... +55    
Mounting type  Tragschienenmontage (EN 60715)   
Climatic category  3K3 (acc. to EN 60721)   
Relative humidity  30% ... 85% (no condensation)   
.

The WAGO 787 series switch-mode AC/DC power supply unit (SMPS PSU) is DNV approved and provides an output of 18Vdc (SELV) at 1.1A with a power rating of 19.8W. It accepts an input voltage range of 85-264Vac (covering 110Vac, 120Vac, 220Vac, 230Vac, 240Vac) or 120-300Vdc, suitable for single-phase AC or DC. The unit features CAGE CLAMP spring connections and is designed for DIN-35 rail mounting with a width of 54mm. It has an IP20 protection rating and operates in ambient temperatures ranging from -25°C to +60°C, equivalent to model 7871007.

View AllClose