WAGO 787-2861/600-000

(No reviews yet) Write a Review
SKU:
787-2861/600-000
Condition:
New
active current limitation:
No
conformity marking:
CE
connection technology:
Push-in CAGE CLAMP
country of origin sales organisation germany:
DE
depth:
94 mm / 3.701 inch
derating:
See instruction manual
efficiency typ:
0.96
fine stranded conductor:
0.34 2.5 mm / 22 14 AWG
fire load:
0.405 MJ
height from upper edge of din rail:
97.8 mm / 3.85 inch
input voltage range:
DC 18 30 V
internal fuse:
T 15 A
isolation voltage connectors housing:
DC 0.5 kV
mounting type:
DIN-35 rail
mtbf:
1,253,313 h (per MIL-HDBK-217F2)
nominal input voltage ui nom:
DC 24 V
nominal output current io nom:
1 x 6 A (Fixed setting)
nominal output voltage uo nom:
1 x DC 24 V
number of jumper slots:
8
operation status indicator:
Green LED (channel OK) || Red LED (tripped channel)
output voltage range:
DC 18 30 V (Ue voltage drop)
packaging type:
Bag
parallel operation of single channels:
Not permitted
pollution degree:
2
power loss pl:
¤ 0.36 W (No load)
protection class:
III
protection type:
IP20 (per EN 60529)
relative humidity:
10 95 % (no condensation permissible)
remote input:
18 30 VDC signal, switches on/off and resets the channel
reverse voltage protection:
No
series operation:
No
signaling:
1 x Status LED (green/yellow/red/blue) || 1 x Control input || 1 x Active signal output (Ui, max. 4 mA)
solid conductor:
0.08 2.5 mm / 28 14 AWG
standards specifications:
EN 61000-6-2 || EN 61000-6-3 || UL 61010-2-201 || DNV GL
strip length:
9 10 mm / 0.35 0.39 inch
surrounding air temperature operation:
-25 70 C (Device starts at 40 C (type-tested): Derating must be observed)
surrounding air temperature storage:
-40 85 C
switch on behavior:
Time-delayed channel switching (load-dependent, min. 170 ms/max. 500 ms)
switch on capacity:
> 50000 F per channel
total number of channels module:
1
transient suppression primary:
Suppressor diode (33 V)
voltage drop:
¤ 25 mV
wago connector:
WAGO 857 Series
weight:
53.620 g
width:
6 mm / 0.236 inch
$57.74