WAGO 787-740

(No reviews yet) Write a Review

Write a Review

WAGO 787-740

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name

Email Required

Review Subject Required

Comments Required

SKU:

787-740

UPC:

MPN:

787-740

Condition:

New

conformity marking:

CE

connection technology:

Push-in CAGE CLAMP

connection technology 2:

Push-in CAGE CLAMP

connection type 1:

Input/output

connection type 2:

Signaling

control deviation:

¤ 1 %

country of origin sales organisation germany:

CN

default setting:

DC 24 V

depth from upper edge of din rail:

130 mm / 5.118 inch

derating:

-1.25 %/K (> 50 C: 400 VAC)

discharge current:

¤ 3.5 mA

efficiency typ:

0.89

fine stranded conductor:

0.5 6 mm / 20 10 AWG

fine stranded conductor 2:

0.2 1.5 mm / 24 14 AWG

fire load:

0.000 MJ

height:

130 mm / 5.118 inch

input current ii:

¤ 3 x 1.2 A (400 VAC: 10 ADC)

input voltage range:

(2 / 3) x AC 360 575 V: DC 500 650 V

inrush current:

¤ 25 A

internal fuse:

3 x T 2 A / 250 VAC

isolation voltage pri gnd:

DC 2.2 kV

isolation voltage pri sec:

DC 4.242 kV

isolation voltage sec gnd:

DC 0.7 kV

isolation voltage sec signal:

DC 0.7 kV

mains failure hold up time:

17 ms (3 x 400 VAC)

mounting type:

DIN-35 rail

mtbf:

> 250,000 h (per IEC 61709)

nominal input voltage ui nom:

(2 / 3) x AC 400 500 V

nominal mains frequency range:

47 63 Hz: 0 Hz

nominal output current io nom:

10 A (24 VDC)

nominal output power:

240 W

nominal output voltage uo nom:

DC 24 V (SELV)

open circuit proof:

Yes

operation status indicator:

Green LED (Uo) || Red LED (overload)

output voltage range:

DC 22 28 V (adjustable)

overload behavior:

Constant power (in overload range: 1.15 1.4 x Io nom): Shutdown and automatic restart in the event of a short circuit

overvoltage category:

II

packaging type:

Box

parallel operation:

Yes

phases:

2 || 3

pollution degree:

2

power factor:

0.5

power factor correction pfc:

Passive

power loss max pl max:

36 W

power loss pl:

¤ 32.5 W

protection class:

I

protection type:

IP20 (per EN 60529)

recommended backup fusing:

3 x circuit breaker 6 A: Tripping characteristic: B or C || Alternative: motor circuit breaker

relative humidity:

10 95 % (no condensation permissible)

required backup fusing:

An external DC fuse is required for the DC input voltage.

residual ripple:

¤ 100 mV (Peak-to-peak)

resistance to reverse feed:

¤ DC 30 V

series operation:

Yes

short circuit protected:

Yes

signaling:

1 x LED DC OK (green) || 1 x Overload LED (red) || 1 x DC OK signal output (optocoupler as make contact: max. 31.2 V: 20 mA)

solid conductor:

0.5 6 mm / 20 10 AWG

solid conductor 2:

0.2 1.5 mm / 24 14 AWG

standards specifications:

EN 62368-1 || EN 61204-3 (Class A) || UL 60950-1 || UL 508

strip length:

11 12 mm / 0.43 0.47 inch

strip length 2:

8 9 mm / 0.31 0.35 inch

surrounding air temperature operation:

-25 70 C

surrounding air temperature storage:

-40 85 C

transient suppression primary:

Varistor

wago connector:

WAGO 2706 Series

wago connector 2:

picoMAX 3.5 (WAGO 2091 Series)

weight:

1265.000 g

width:

65 mm / 2.559 inch