Description
Socket with miniature switching relay; Relay with 2 changeover contacts (2u); 48 VDC; electrical and mechanical status indication; manually operated
View AllClose
- Reinforced insulation between coil and contacts
- A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
- To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.
The WAGO 788 series plug-in relay assembly features a socket base, manual operation, and a red LED indicator. It is a 2-pole (2P) relay with a control voltage range of 43.2-52.8Vdc (48Vdc nominal) and a 2C/O (DPDT) contact configuration. The electromechanical design supports a rated current of 8A continuous, 1.5A at 240Vac (AC-15), and 1A at 24Vdc (DC-13). It includes Push-in CAGE CLAMP connections and is designed for DIN-35 rail mounting with a 15mm width. The relay has an IP20 protection rating and uses Silver-Nickel (AgNi) contacts, equivalent to model 788347.