WAGO 788-390 Relay Module, 24 VDC, 2 Changeover Contacts, 8 A Continuous Current, DIN Rail Mount
Wago
$31.07
Socket with miniature switching relay; Relay with 2 changeover contacts (2u); 24 VDC; electrical and mechanical status indication; for railway operations
- Reinforced insulation between coil and contacts
- A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
- To protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.
The WAGO 788 series plug-in relay assembly is designed for railway applications and features a socket base with a red LED. It has 2 poles (2P) and operates with a control voltage range of 16.8-30Vdc (nominal 24Vdc). The relay has a Double Pole Double Throw (DPDT) contact configuration and an electromechanical design. It supports a rated current of 8A continuously, 1.5A at 240Vac (AC-15), and 1A at 24Vdc (DC-13). The assembly includes Push-in CAGE CLAMP connections and is mounted on a DIN-35 rail with a 15mm width. It has an IP20 protection rating and uses Silver-Nickel (AgNi) contacts, equivalent to model 788390.
- bounce time typ:
- 7 ms
- connection technology:
- Push-in CAGE CLAMP
- contact material relay:
- AgNi
- country of origin sales organisation germany:
- DE
- depth from upper edge of din rail:
- 73 mm / 2.874 inch
- dielectric strength control load circuit ac 1 min:
- 5 kVrms
- dielectric strength load load circuit ac 1 min:
- 2.5 kVrms
- dielectric strength open contact ac 1 min:
- 1 kVrms
- drop out time typ:
- 8 ms
- electrical life no resistive load 23 c:
- 10 x 103 switching operations
- fine stranded conductor:
- 0.34 2.5 mm / 22 14 AWG
- fire load:
- 0.689 MJ
- height:
- 86 mm / 3.386 inch
- input voltage range:
- -30 +25 %
- inrush current resistive max:
- (AC) 16 A / 0.02 s: (AC) 12 A / 4 s
- limiting continuous current:
- 0.333333333333333
- mechanical life:
- 5 x 106 switching operations
- mounting type:
- DIN-35 rail
- nominal input current at un:
- 19.1 mA
- nominal input voltage un:
- DC 24 V
- note:
- Reinforced insulation between coil and contactsTo protect the relay coils and contacts, inductive loads must be dampened with an effective protection circuit.
- number of changeover switchover contacts:
- 2
- packaging type:
- Box
- pollution degree:
- 3
- processing temperature:
- -25 +50 C
- protection type:
- IP20
- pull in time typ:
- 15 ms
- rated surge voltage:
- 4 kV
- rated voltage:
- 250 V
- recommended minimum load:
- 12 V / 10 mA
- safety information 1:
- A separator plate (e.g., 209-191) must be used for voltages greater than 250 V between adjacent relay modules and for compliance with the reinforced insulation requirements.
- solid conductor:
- 0.34 2.5 mm / 22 14 AWG
- standards specifications:
- EN 61010-2-201 || EN 61810-1 || EN 61373
- status indicator:
- Red LED || Mechanical
- strip length:
- 9 10 mm / 0.35 0.39 inch
- surrounding air temperature operation at un:
- -40 70 C
- surrounding air temperature storage:
- -40 70 C
- switching capacity:
- AC-15: 1.5 A / AC 240 V: DC-13: 1 A / DC 24 V
- switching frequency with without load max:
- 6 min-1 / 300 min-1
- switching power resistive max:
- AC 2000 VA: DC (see load limit curve)
- switching voltage max:
- AC 250 V
- wago basic relay:
- 788-929
- weight:
- 48.000 g
- width:
- 15 mm / 0.591 inch
