WAGO 859-722 Optocoupler Module, 110 VDC Input, 24 VDC Output, 50 mA, 2-Wire Connection, DIN Rail Mount, 6 mm Width
Wago
$34.76
Optocoupler module; Nominal input voltage: 110 VDC; Output voltage range: 10
30 VDC; Limiting continuous current: 50 mA; 2-wire connection; Railway; Red status indicator; Module width: 6 mm; gray.
The WAGO 859 series fixed-type solid-state relay (SSR) with a red LED is designed for railway applications and features a 2-wire connection. It is a single-pole, single-phase relay with a control voltage range of 77-137.5Vdc (nominal 110Vdc) and an output rated voltage of 12Vdc-30Vdc (nominal 24Vdc). The relay supports a continuous rated current of 0.05A and utilizes CAGE CLAMP connections for secure wiring. It is designed for DIN-35 rail mounting with a 6mm width and is equivalent to model 859722.
- circuit type:
- 2-wire connection
- connection technology:
- CAGE CLAMP
- country of origin sales organisation germany:
- DE
- depth from upper edge of din rail:
- 56 mm / 2.205 inch
- dielectric strength control load circuit ac 1 min:
- 3 kVrms
- fine stranded conductor:
- 0.08 2.5 mm / 28 14 AWG
- fire load:
- 0.313 MJ
- height:
- 91 mm / 3.583 inch
- input voltage range high level:
- DC 77 137.5 V
- input voltage range low level:
- DC 0 20 V
- insulation type between adjacent devices of the the same type:
- Reinforced insulation (safe isolation)
- insulation type control load circuit:
- Reinforced insulation (safe isolation)
- leakage current at rated voltage:
- ¤ 25 A
- limiting continuous current:
- 0.05 A
- mounting type:
- DIN-35 rail
- nominal input current at un:
- 2.7 mA
- nominal input voltage un:
- DC 110 V
- nominal output voltage:
- DC 24 V
- note:
- Optocouplers and solid state relays are designed for use in signal processing networks, which are not supplied by the low-voltage power supply networks.
- operating altitude max:
- 2000 m
- output voltage range:
- DC 12 30 V
- overvoltage category:
- II
- packaging type:
- Box
- pollution degree:
- 2
- processing temperature:
- -25 +50 C
- rated voltage:
- 300 V
- relative humidity:
- 5 95 % (no condensation permissible)
- solid conductor:
- 0.08 2.5 mm / 28 14 AWG
- standards specifications:
- EN 61010-2-201 || EN 61000-6-2 || EN 61000-6-3 || EN 50121-3-2
- status indicator:
- Red LED
- strip length:
- 5 6 mm / 0.2 0.24 inch
- surrounding air temperature operation at un:
- -40 70 C
- surrounding air temperature storage:
- -40 70 C
- switching frequency:
- ¤ 1.5 kHz
- turn off time:
- ¤ 120 s
- turn on time:
- ¤ 20 s
- voltage drop at output max:
- ¤ DC 2 V
- weight:
- 18.299 g
- width:
- 6 mm / 0.236 inch
